Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Z4m on CSL alignment vs standard

"M" Specific discussion
User avatar
Tcochrane92
Member
Member
Posts: 650
Joined: Sat Apr 09, 2016 3:30 pm
Location: Leamington Spa, Warwickshire, UK

Z4m on CSL alignment vs standard

Post by Tcochrane92 » Thu Jan 04, 2018 1:01 pm

My car needs an alignment doing and have read a few posts about applying the M3 CSL alignment to the Z4m, saying it makes it more neutral and more engaging on the road.

Is this a recommended set up to use on standard M suspension? Do I need to modify anything to accomodate the CSL set up?

Cheers
Current: Imola Red 400bhp 640d & Ocean Blue BMW S1000XR Sport SE
Past: Silver Grey Z4MR, Silver Grey Z4C & Titan Silver Z4 3.0i

VRSteve
Member
Member
Posts: 565
Joined: Sat Aug 08, 2015 9:36 pm
Location: West Sussex

Z4m on CSL alignment vs standard

Post by VRSteve » Fri Jan 05, 2018 4:23 pm

I've done this to mine, although I'm running the B12 suspension kit.

You wont get the caster angles because of the offset lollipop bushes, and you may need to have the camber pins removed.

Its personal preference at the end of the day. I think it sharpens the car up a little, makes it nicer to drive and easier to chuck about.
A previous forum member who has since left drove my car and his back to back and much preferred the way mine was set up.

I'd say its well worth doing.
///M|Silver Grey|Black Leather|BT|Nav|DSP|Heated Seats|PDC|Stubby|Turner Limiters|Turner Rear Top Mounts|Bilstein B12|Powerflex ARB Bushes|Powerflex Lollipops|M-Track|
SOLD

User avatar
Argenta
Senior Member
Senior Member
Posts: 1051
Joined: Sat Feb 07, 2015 7:49 pm

Z4m on CSL alignment vs standard

Post by Argenta » Sat Jan 06, 2018 10:59 am

Mine too but with Eibach Pro springs.
Transformed my car, good turn in, less jiddish rear end & a lot better/softer suspension.

User avatar
Attilio
Member
Member
Posts: 763
Joined: Tue Oct 31, 2017 11:11 am
Location: Dublin

Z4m on CSL alignment vs standard

Post by Attilio » Sat Jan 06, 2018 11:56 am

That’s interesting: I am not too happy with the car’s turn in (also possibly due to Continentals fitted to the front while the back is fitted with Michelin PSS)...
I am also thinking of fitting a strut brace to improve front end feeling.

I guess the CSL alignment settings are known to alignment shops?
Z4M Coupe, Interlagos blue, black leather, piano black, stubby, OEM CSLs, evolve intake, cup holders...pretty much stock
2019 Toyota Corolla hybrid 2.0L - new daily drive

VRSteve
Member
Member
Posts: 565
Joined: Sat Aug 08, 2015 9:36 pm
Location: West Sussex

Z4m on CSL alignment vs standard

Post by VRSteve » Sat Jan 06, 2018 12:18 pm

Attilio wrote: Sat Jan 06, 2018 11:56 am That’s interesting: I am not too happy with the car’s turn in (also possibly due to Continentals fitted to the front while the back is fitted with Michelin PSS)...
I am also thinking of fitting a strut brace to improve front end feeling.

I guess the CSL alignment settings are known to alignment shops?
Will be on the alignment machine
///M|Silver Grey|Black Leather|BT|Nav|DSP|Heated Seats|PDC|Stubby|Turner Limiters|Turner Rear Top Mounts|Bilstein B12|Powerflex ARB Bushes|Powerflex Lollipops|M-Track|
SOLD

User avatar
Attilio
Member
Member
Posts: 763
Joined: Tue Oct 31, 2017 11:11 am
Location: Dublin

Z4m on CSL alignment vs standard

Post by Attilio » Sat Jan 06, 2018 12:20 pm

VRSteve wrote: Sat Jan 06, 2018 12:18 pm
Attilio wrote: Sat Jan 06, 2018 11:56 am That’s interesting: I am not too happy with the car’s turn in (also possibly due to Continentals fitted to the front while the back is fitted with Michelin PSS)...
I am also thinking of fitting a strut brace to improve front end feeling.

I guess the CSL alignment settings are known to alignment shops?
Will be on the alignment machine
Thanks :thumbsup:
Z4M Coupe, Interlagos blue, black leather, piano black, stubby, OEM CSLs, evolve intake, cup holders...pretty much stock
2019 Toyota Corolla hybrid 2.0L - new daily drive

User avatar
Tcochrane92
Member
Member
Posts: 650
Joined: Sat Apr 09, 2016 3:30 pm
Location: Leamington Spa, Warwickshire, UK

Z4m on CSL alignment vs standard

Post by Tcochrane92 » Sat Jan 06, 2018 1:20 pm

Thanks all, I'll ask the garage to put my car on the CSL set up :thumbsup:
Current: Imola Red 400bhp 640d & Ocean Blue BMW S1000XR Sport SE
Past: Silver Grey Z4MR, Silver Grey Z4C & Titan Silver Z4 3.0i

User avatar
Tcochrane92
Member
Member
Posts: 650
Joined: Sat Apr 09, 2016 3:30 pm
Location: Leamington Spa, Warwickshire, UK

Z4m on CSL alignment vs standard

Post by Tcochrane92 » Sun Jan 07, 2018 11:46 am

I have decided to change to the B12 set up, but not until early Spring (when funds allow)

In the meantime, if I put on the CSL set up now (with standard M suspension) is removing the camber pins an issue?
Also, if I can't get the caster angles, does that make much of a difference?
Am I better of sticking with the standard M geometry with the M suspension, then changing to CSL when I've got the B12 kit on?
Current: Imola Red 400bhp 640d & Ocean Blue BMW S1000XR Sport SE
Past: Silver Grey Z4MR, Silver Grey Z4C & Titan Silver Z4 3.0i

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Z4m on CSL alignment vs standard

Post by Scooba_Steve » Sun Jan 07, 2018 12:26 pm

The pins are just for locating the struts, so no issue with removal when having alignment done.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

User avatar
MrPT
Lifer
Lifer
Posts: 4745
Joined: Sun Oct 21, 2012 7:44 pm
Location: Bucks/Oxon

Z4m on CSL alignment vs standard

Post by MrPT » Sun Jan 07, 2018 9:57 pm

I would try maximum negative camber on the front struts yourself (pull the pins) before anything else. Someone showed me what was involved last year at a meet and I wish I’d known earlier. It’s easy and quick to do, is reversible and will give you more of an idea of what you want to do with the geo when you get it set up properly. For example, you’ll be inadvertently adding a bit of front toe out when you increase the camber, which I’ve not heard any horror stories about (possibly because the stock geo has front toe in), but you may want to then ask for it to be tweaked back to +ve for more stability,p.

The main difference will be that the car will feel like it wants to rotate more keenly, and this might help you form an opinion about what setup you want for the rear, which is not something that’s as easy to experiment with yourself. You could go for the CSL settings, for example, and/or request that rear camber is reduced (e.g. to -1.25) to further neutralise the tendency to understeer that is built into the car from the factory.
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone

User avatar
RedUn
Senior Member
Senior Member
Posts: 1102
Joined: Sat Jun 16, 2012 7:33 pm
Location: Hertfordshire

Z4m on CSL alignment vs standard

Post by RedUn » Tue Jan 16, 2018 1:36 am

You can't go wrong the the csl geo and a strut brace, it makes the car feel like it should have from the factory :thumbsup:
IMOLA Z4///MR

User avatar
Spaniarduk
Member
Member
Posts: 404
Joined: Thu Aug 11, 2016 1:36 am

Z4m on CSL alignment vs standard

Post by Spaniarduk » Wed Feb 07, 2018 10:57 pm

Is there any thread, write-up or video on how to remove the strut pins?
Volando voy
Volando vengo
Volando voy
Volando vengo, -engo
Y por el camino
Yo me entretengo 🕺💃

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Z4m on CSL alignment vs standard

Post by srhutch » Wed Feb 07, 2018 11:10 pm

Spaniarduk wrote: Wed Feb 07, 2018 10:57 pmIs there any thread, write-up or video on how to remove the strut pins?
Molegrips and turn anti-clockwise. They are soft and on a very coarse thread.
Image

User avatar
Spaniarduk
Member
Member
Posts: 404
Joined: Thu Aug 11, 2016 1:36 am

Z4m on CSL alignment vs standard

Post by Spaniarduk » Thu Feb 08, 2018 8:32 am

srhutch wrote: Wed Feb 07, 2018 11:10 pm
Spaniarduk wrote: Wed Feb 07, 2018 10:57 pmIs there any thread, write-up or video on how to remove the strut pins?
Molegrips and turn anti-clockwise. They are soft and on a very coarse thread.
Simple as that?? Lol I must try it. Are the pins removed from the top or do I need to remove the wheel arch liner to do it from underneath?
I guess all you do afterwards is loosen the 3 nuts fixing the strut to the dome and push them inwards towards the engine bay?
Volando voy
Volando vengo
Volando voy
Volando vengo, -engo
Y por el camino
Yo me entretengo 🕺💃

User avatar
abar121
Member
Member
Posts: 499
Joined: Tue Apr 26, 2011 9:14 pm

Z4m on CSL alignment vs standard

Post by abar121 » Thu Feb 08, 2018 10:49 am

Just remove them from the top. Have the front jacked up, loosen the strut and move them inwards towards the engine.

It takes minutes and makes a big difference. Try it!
'07 Z4M Interlagos Blue. All options except extended leather.

Post Reply