Engine misfire codes

Discuss problems you have had or are having with your Z4
Post Reply
Posts: 419
Joined: Fri Jun 17, 2016 9:12 pm

Engine misfire codes

Post by Magicarcher » Wed Nov 15, 2017 9:16 pm

Just hooked up ISTA-D to investigate a CDL issue, in the process I discovered two engine misfire codes:

002742 DME:Misfire Cylinder 1 (SAE code = P0301)
002892 DME:Misfiring (SAE code = P0313)

Neither are currently present, both occurred within 16km of each other

The first code gave a clue as "Damaging Exhaust Gas after engine start up sequence", fault would not cause MIL light
The second code gave a clue that it was "detected at low Fuel level 7L"

Does anyone have any clue what these codes mean or what could have been the problem, my Z4 has not been running as smoothly recently and fuel consumption has dropped 15%.
Z4 3.0L 2005.

Senior Member
Senior Member
Posts: 2634
Joined: Mon Jun 15, 2015 11:38 am
Location: Manchester

Engine misfire codes

Post by MACK » Wed Nov 15, 2017 9:20 pm

Misfire is most likely a coil pack issue. You can try moving number1 to a different cylinder and see if you get a fault repetition on the new cylinder. If it is a coil pack it's best to replace all 6.
Silver 05 3.0i SE

Mods- F/L Xenons 4 Spot Clear Rear Lights Clear 3rd Brake Light M Sport E/H Seats & MFSW Eibachs & B4s 107s & 15/20mm Spacers 3M Carbon Wrap Dash Trims Parrot MKi9100 screen in ashtray Cruise MM Tips
ZHP Stubby

Post Reply