Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
best place for Kw V3's?
-
- Member
- Posts: 361
- Joined: Tue Apr 11, 2017 5:28 pm
best place for Kw V3's?
Ok I have an answer. Thought I’d post it here for reference in case someone else is confused as I was. So for maximum ride height you set measurement A on the fronts to 70mm & on the rear to 20mm. There will still be remaining thread but do not exceed maximum recommended measurements. Minimum ride height is 40mm front & 0mm rear.
- Yeddheng
- Newbie
- Posts: 48
- Joined: Sat Jan 14, 2012 2:47 pm
- Location: in the clouds
best place for Kw V3's?
In my opinion the factory rebound and bump settings are quite stiff, and for those who are about to drive long highway stints, I'll recommend switching to these settings:
Rebound -top knob- Front: 12, Rear: 15
Bump -bottom knob- Front: 6 , Rear: 10
It feels like driving on clouds in comparison.
The settings are the number of clicks anticlockwise starting from max clockwise/stiffest/+. There are a total of 16 clicks for rebound and 12 for bump.
Rebound -top knob- Front: 12, Rear: 15
Bump -bottom knob- Front: 6 , Rear: 10
It feels like driving on clouds in comparison.
The settings are the number of clicks anticlockwise starting from max clockwise/stiffest/+. There are a total of 16 clicks for rebound and 12 for bump.
Z4 MC 07 / A08 Silver grey / Black interior w Carbon leather / VT+RE mounts / 10.9 / cdv- / RPi / Cup2 / Arc-8 / Lugs / KW V3 / GC camber plates / Vorshlag RTAB limiters / Custom alignment / Aux / Stubby / Mud flaps /
My Z4MC
My Z4MC
-
- Member
- Posts: 417
- Joined: Fri Jun 21, 2019 11:01 am
- Location: Christchurch New Zealand
best place for Kw V3's?
What spec are your Apex Arc8 wheels Yeddheng? Thank you for a prompt reply.
-
- Member
- Posts: 417
- Joined: Fri Jun 21, 2019 11:01 am
- Location: Christchurch New Zealand
-
- Member
- Posts: 580
- Joined: Mon Aug 31, 2015 1:03 am
- Location: Hampshire
best place for Kw V3's?
How did I miss the imola lowered on kwv3 thread
Imola z4mr, carbon graphite ispiri FFR-6, mpss, gruppem, kw v3, oe strutbrace, aero skirts, schmiedmann carbon splitter, bcs exhaust, dice media, gaptech, F10 zhp & smiles every journey.
- RedUn
- Senior Member
- Posts: 1107
- Joined: Sat Jun 16, 2012 7:33 pm
- Location: Hertfordshire
best place for Kw V3's?
Love it!
Such a good looking car once lowered they really do sit well!
IMOLA Z4///MR
- Yeddheng
- Newbie
- Posts: 48
- Joined: Sat Jan 14, 2012 2:47 pm
- Location: in the clouds
best place for Kw V3's?
Sorry for the delay but here are the specs:
Front: 18”x8,5” et38. (Tyre: 235x40)
Rear: 18”x10” et25 (Tyre: 265x35)
No spacers required but there’s room for 12mm with >-2 camber up front. No room for spacers rear.
Z4 MC 07 / A08 Silver grey / Black interior w Carbon leather / VT+RE mounts / 10.9 / cdv- / RPi / Cup2 / Arc-8 / Lugs / KW V3 / GC camber plates / Vorshlag RTAB limiters / Custom alignment / Aux / Stubby / Mud flaps /
My Z4MC
My Z4MC