Z4-forum.com

Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

best place for Kw V3's?

"M" Specific discussion
Post Reply
Mos6689
Member
Member
Posts: 361
Joined: Tue Apr 11, 2017 5:28 pm

best place for Kw V3's?

Post by Mos6689 » Mon Aug 09, 2021 7:34 pm

Ok I have an answer. Thought I’d post it here for reference in case someone else is confused as I was. So for maximum ride height you set measurement A on the fronts to 70mm & on the rear to 20mm. There will still be remaining thread but do not exceed maximum recommended measurements. Minimum ride height is 40mm front & 0mm rear.
Top
User avatar
Yeddheng
Newbie
Newbie
Posts: 48
Joined: Sat Jan 14, 2012 2:47 pm
Location: in the clouds

best place for Kw V3's?

Post by Yeddheng » Tue Aug 10, 2021 8:17 am

In my opinion the factory rebound and bump settings are quite stiff, and for those who are about to drive long highway stints, I'll recommend switching to these settings:
Rebound -top knob- Front: 12, Rear: 15
Bump -bottom knob- Front: 6 , Rear: 10
It feels like driving on clouds in comparison. :oops:

The settings are the number of clicks anticlockwise starting from max clockwise/stiffest/+. There are a total of 16 clicks for rebound and 12 for bump.
Z4 MC 07 / A08 Silver grey / Black interior w Carbon leather / VT+RE mounts / 10.9 / cdv- / RPi / Cup2 / Arc-8 / Lugs / KW V3 / GC camber plates / Vorshlag RTAB limiters / Custom alignment / Aux / Stubby / Mud flaps /

My Z4MC
Top
BTZ461
Member
Member
Posts: 417
Joined: Fri Jun 21, 2019 11:01 am
Location: Christchurch New Zealand

best place for Kw V3's?

Post by BTZ461 » Thu Aug 12, 2021 9:30 pm

What spec are your Apex Arc8 wheels Yeddheng? Thank you for a prompt reply.
Top
BTZ461
Member
Member
Posts: 417
Joined: Fri Jun 21, 2019 11:01 am
Location: Christchurch New Zealand

best place for Kw V3's?

Post by BTZ461 » Thu Aug 12, 2021 10:05 pm

BTZ461 wrote: ↑Thu Aug 12, 2021 9:30 pm What spec are your Apex Arc8 wheels Yeddheng? Thank you for a prompt reply.
Found the specs, what size spacer are you running on the front? From memory, no spacer at the rear with 10" and ET25. Fantastic pictures, thank you for sharing.
Top
Rally
Member
Member
Posts: 580
Joined: Mon Aug 31, 2015 1:03 am
Location: Hampshire

best place for Kw V3's?

Post by Rally » Thu Aug 12, 2021 10:44 pm

How did I miss the imola lowered on kwv3 thread :rofl:
20210731_105544.jpg
20210731_105544.jpg (276.77 KiB) Viewed 563 times
Imola z4mr, carbon graphite ispiri FFR-6, mpss, gruppem, kw v3, oe strutbrace, aero skirts, schmiedmann carbon splitter, bcs exhaust, dice media, gaptech, F10 zhp & smiles every journey.
Top
User avatar
RedUn
Senior Member
Senior Member
Posts: 1107
Joined: Sat Jun 16, 2012 7:33 pm
Location: Hertfordshire

best place for Kw V3's?

Post by RedUn » Fri Aug 13, 2021 8:52 am

Rally wrote: ↑Thu Aug 12, 2021 10:44 pm How did I miss the imola lowered on kwv3 thread :rofl:
20210731_105544.jpg
Love it! 8)

Such a good looking car once lowered they really do sit well!
IMOLA Z4///MR
Top
User avatar
Yeddheng
Newbie
Newbie
Posts: 48
Joined: Sat Jan 14, 2012 2:47 pm
Location: in the clouds

best place for Kw V3's?

Post by Yeddheng » Fri Aug 13, 2021 4:51 pm

BTZ461 wrote: ↑Thu Aug 12, 2021 10:05 pm
BTZ461 wrote: ↑Thu Aug 12, 2021 9:30 pm What spec are your Apex Arc8 wheels Yeddheng? Thank you for a prompt reply.
Found the specs, what size spacer are you running on the front? From memory, no spacer at the rear with 10" and ET25. Fantastic pictures, thank you for sharing.
Sorry for the delay but here are the specs:
Front: 18”x8,5” et38. (Tyre: 235x40)
Rear: 18”x10” et25 (Tyre: 265x35)
No spacers required but there’s room for 12mm with >-2 camber up front. No room for spacers rear. :thumbsup:
Z4 MC 07 / A08 Silver grey / Black interior w Carbon leather / VT+RE mounts / 10.9 / cdv- / RPi / Cup2 / Arc-8 / Lugs / KW V3 / GC camber plates / Vorshlag RTAB limiters / Custom alignment / Aux / Stubby / Mud flaps /

My Z4MC
Top
Post Reply

Return to “"M" Specific”