Hi
I am in the process of improving the finish of my wheels ,powder coated ,refinishing wheel nuts etc and I am looking at the wheel hubs and wondering the best option to refinish them.
I have read that they are aluminium is this correct ? The hubs are not bad they just need tidying up a bit has anybody refinished these before
ie abraded them and repainted them. If repainted what paint was used ?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Wheel hubs
- bradz
- Member
- Posts: 455
- Joined: Thu Jul 11, 2013 6:26 pm
- Location: Bedford
Wheel hubs
Guessing you mean the inner part of the brake disc that goes rusty.
Ideally treat with a rust proof primer then spray with a high heat paint (Masking the pad surface area)
Adam
Ideally treat with a rust proof primer then spray with a high heat paint (Masking the pad surface area)
Adam
Z4M Coupe, E92 M3, E46 M3 Track car
-
- Lifer
- Posts: 12725
- Joined: Sun Nov 30, 2008 1:03 pm
- Location: Liverpool
- Contact:
Wheel hubs
If you mean the bells, then yes they are ally.
You can rub them down to remove any oxidisation, but you’ll have to keep doing that. You always get them anodised to protect the surface a bit longer, or the easiest option (at the current prices) may be to buy a new set of disks.
You can rub them down to remove any oxidisation, but you’ll have to keep doing that. You always get them anodised to protect the surface a bit longer, or the easiest option (at the current prices) may be to buy a new set of disks.
- buzyg
- Legend
- Posts: 26534
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
- Smartbear
- Lifer
- Posts: 13685
- Joined: Wed Feb 05, 2014 6:54 pm
- Location: a barn in Somerset
Wheel hubs
Can you make out the silver painted part of the disc inboard of the wheel? That’s the bell/carrier/hub on some cars they’re part of the disc and made from the same cast iron material which rusts like crazy unless painted
Robe89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold
- MrPT
- Lifer
- Posts: 4746
- Joined: Sun Oct 21, 2012 7:44 pm
- Location: Bucks/Oxon
Wheel hubs
OP, is this for a Z4M? We’re in the “M” section.
If so, they’re aluminium; if not, they are probably (but not definitely) iron.
If so, they’re aluminium; if not, they are probably (but not definitely) iron.
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone
2006 Z4 2.5si: gone