I've got the usual common sag in the exhaust back boxes making the tips look slightly wonky. Does anyone know which hangers need replacing on this diagram:
https://www.realoem.com/bmw/enUS/showpa ... Id=18_0660
I've ordered part 6 x2 already with new bolts etc. But do the parts 8 + 9 need replacing as well seeing as they appear to be rubber hangers as well and possibly seen better days?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Exhaust Hanger replacement
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
Exhaust Hanger replacement
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
-
- Member
- Posts: 170
- Joined: Fri Jun 21, 2013 8:23 am
- Location: Guildford
Exhaust Hanger replacement
I wanted to adjust mine, as they were sitting quite low. I discovered that the hangers didn’t help raise them enough. Ended up having to undo the bolts to the silencer and holding the cans in the desired position and retightening. Worth a go too.
Z4MC Interlagos Blue
Instagram: z4mcuk
Instagram: z4mcuk
-
- Senior Member
- Posts: 2257
- Joined: Sun Aug 31, 2014 4:33 pm
- Location: Essex
- Contact:
Exhaust Hanger replacement
The rubber is very hard, so I'd be surprised if they have warped. Try adjusting the bolts and seeing you can make the right adjustment there.
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Exhaust Hanger replacement
Would be worth ordering these if you are going to adjust your Exhausts.
https://www.ebay.co.uk/itm/BMW-E46-M3-Z ... SwZQRYfgGh
https://www.ebay.co.uk/itm/BMW-E46-M3-Z ... SwZQRYfgGh
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
Exhaust Hanger replacement
Cheers chaps. Got the i6 kit as well so all good on that front.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
- bradz
- Member
- Posts: 455
- Joined: Thu Jul 11, 2013 6:26 pm
- Location: Bedford
Exhaust Hanger replacement
Z4M Coupe, E92 M3, E46 M3 Track car