Oil change

[Simon 3.2M]

Managed to get a deal on 8ltrs of Castrol 10/60 so I can do an interim oil change. Is there anything different when doing an oil change on the S54 as opposed to a standard car?

[PDJ]

Did mine a few days ago there is a copper washer under the head of the drain plug you could get a new one or as I did reuse it if in good condition I also used a small amount of loctite sealant but only on the two threads at the head end of the bolt and on the copper washer.

[Simon 3.2M]

Did mine a few days ago there is a copper washer under the head of the drain plug you could get a new one or as I did reuse it if in good condition I also used a small amount of loctite sealant but only on the two threads at the head end of the bolt and on the copper washer.

Thanks pal - is it 7ltrs?

[R60BBA]

Did mine a few days ago there is a copper washer under the head of the drain plug you could get a new one or as I did reuse it if in good condition I also used a small amount of loctite sealant but only on the two threads at the head end of the bolt and on the copper washer.

Thanks pal - is it 7ltrs?

5.5 litres of 10w60
Obviously don’t forget to change the filter too.

[Mangozac]

Did mine a few days ago there is a copper washer under the head of the drain plug you could get a new one or as I did reuse it if in good condition I also used a small amount of loctite sealant but only on the two threads at the head end of the bolt and on the copper washer.

New oil filters come with a replacement copper crush washer, so reusing the washer, even with the Loctite involved, isn't great.

If you are stuck and have to reuse a copper crush washer annealing it with a torch flame will return it to it's soft, "unused" state.