Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Vanne's lightweight/ interior modification thread
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
Oem door panel minus speaker, door Handel and bunch of steel clips weighs 3.2kgs, my door panel weighs .9 kg. Once complete, there will probably be a 2 to 2.3kg difference per side.. it's not much, but 4kgs is still a good amount. (The extra .3 will come from the Alcantara) and it's a project I am enjoying..
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- Ghostrider.1127
- Member
- Posts: 50
- Joined: Mon Jan 07, 2019 10:52 am
- Location: Berlin (DE) Stockholm (SVE)
Vanne's lightweight/ interior modification thread
Interesting extended weight reduction job !!!
- Liam22
- Member
- Posts: 645
- Joined: Thu Dec 06, 2018 2:28 pm
- Location: Herts/Cambs
Vanne's lightweight/ interior modification thread
Great thread! Will be most useful for my race car build.
Although I can't say that I recommend using flammable materials (wood and glue) for doorcards
Although I can't say that I recommend using flammable materials (wood and glue) for doorcards
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
Thanks for the comments Liam,
pretty much ALL door panels are made from flammable materials. (bare ALU being the exception to the rule)
pretty much ALL door panels are made from flammable materials. (bare ALU being the exception to the rule)
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- Liam22
- Member
- Posts: 645
- Joined: Thu Dec 06, 2018 2:28 pm
- Location: Herts/Cambs
Vanne's lightweight/ interior modification thread
Very true. But not so much on track/race cars (which tend to catch fire more often than road cars). Carbon fibre and ABS plastic being most popular.
No criticism intended - you've done a great job - and the weight saving is impressive.
No criticism intended - you've done a great job - and the weight saving is impressive.
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
Thanks again Liam, this is only a hard mould. I have abs plastic panels on its way, but they are also flamible. cF is probably the way to go, but the price is astronomical, for what it is fibreglass is even more flamible than wood. Ask me, I used to shape surfboards. Lol
When are you going to start stripping yours.
When are you going to start stripping yours.
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- Liam22
- Member
- Posts: 645
- Joined: Thu Dec 06, 2018 2:28 pm
- Location: Herts/Cambs
Vanne's lightweight/ interior modification thread
As soon as the current race car is sold! Although I might sneak in a cheeky trip to the 'Ring before starting on the full build
-
- Member
- Posts: 815
- Joined: Mon Jan 09, 2017 10:42 pm
Vanne's lightweight/ interior modification thread
I’m guessing there will be some bits people on here need for sale
Z4MC
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
Yup, my whole pop up screen, amp, radio, tv media box thing and nav computer/rom bits are all up for grabs.
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
Lol due to popular demand and some guys pointing my nose at the obvious..
Just bought some 2x2 twill of CF material. specs below.
Going to see if my surfboard shaping skills haven't left me.
Material
High-quality Toray Carbon Fiber
Weave: 2*2 twill
Ends Per Inch :13
Yarn Size: 3K
Thickness: 0.012"/0.3mm
Weight: 7.1oz / 240gsm
Tensile strength:640KSI / 4380Mpa
This should be fun, I wonder what would be nicer, matt or gloss, probably matt id say.
Depending on the cost of the resin, should turn out pretty cheap, even if I have to double up on the CF to get the thickness I need. Looking for 1mm thick skin. hopefully will turn out pretty darn light.. sadly, if it turns out really nice, it would be a shame to cover up the CF with Alcantara, so if this does turn out good, ill probably only cover the arm rest in fabric.
Note: I've decided against using the P-rs3 door pulls as dual action, opening and unlocking the door, as if something happens and gowd-forbid, you need to get out fast, id never forgive myself if something went wrong with the door pull and for whatever reason that you couldn't open the door. Going to use the stock oem door openers.. at least they are engineered to work, and safe.
The door pulls will be just that, a door pull. not for opening and unlocking the door, just to pull the door shut.. because of the way this panel is designed, you could probably use the armrest to pull the door shut..
Just bought some 2x2 twill of CF material. specs below.
Going to see if my surfboard shaping skills haven't left me.
Material
High-quality Toray Carbon Fiber
Weave: 2*2 twill
Ends Per Inch :13
Yarn Size: 3K
Thickness: 0.012"/0.3mm
Weight: 7.1oz / 240gsm
Tensile strength:640KSI / 4380Mpa
This should be fun, I wonder what would be nicer, matt or gloss, probably matt id say.
Depending on the cost of the resin, should turn out pretty cheap, even if I have to double up on the CF to get the thickness I need. Looking for 1mm thick skin. hopefully will turn out pretty darn light.. sadly, if it turns out really nice, it would be a shame to cover up the CF with Alcantara, so if this does turn out good, ill probably only cover the arm rest in fabric.
Note: I've decided against using the P-rs3 door pulls as dual action, opening and unlocking the door, as if something happens and gowd-forbid, you need to get out fast, id never forgive myself if something went wrong with the door pull and for whatever reason that you couldn't open the door. Going to use the stock oem door openers.. at least they are engineered to work, and safe.
The door pulls will be just that, a door pull. not for opening and unlocking the door, just to pull the door shut.. because of the way this panel is designed, you could probably use the armrest to pull the door shut..
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Vanne's lightweight/ interior modification thread
That's with rollbar, rear and front Stb (back one is heavy) big battery in the boot, (11lbs one on the way) and door cards in place. Lol and full fuel. so half tank would be minus 27.5 kgs.
Note the rear right will come down by 7kgs for the batt, with the fuel at 1/2 tank which will pretty much put it in 50/50.
Pretty darn happy with that.
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- philbo909
- Senior Member
- Posts: 1072
- Joined: Fri Apr 28, 2017 4:46 pm
- Location: SN8
Vanne's lightweight/ interior modification thread
Looking forwards to an update on your self fabricated cf door cards
Shouldn't have let it slip that you're handy with GRP
Shouldn't have let it slip that you're handy with GRP
Sapphire black z4 coupe 135,000miles young
- BMWZ4MC
- Lifer
- Posts: 6342
- Joined: Sun Sep 13, 2009 4:24 pm
- Location: Back in the sunshine
Vanne's lightweight/ interior modification thread
No ballast for a driver I presume? That’s pretty good anyway, although you’re over estimating the density of petrol (half a tank weighs less than 20kg).
Z4MC - heavily fettled for track use
Lotus Exige - sensible daily driver on the mods slippery slope
Westfield SEiW - in hibernation
Modified RS4 Avant - back in Blighty
S2000 GT - gone
-
- Member
- Posts: 170
- Joined: Fri Jun 21, 2013 8:23 am
- Location: Guildford
Vanne's lightweight/ interior modification thread
What are all the electronic boxes on the rear of the firewall? (where all the speakers are located). Do you reckon that firewall adds much torsional rigidity?
Z4MC Interlagos Blue
Instagram: z4mcuk
Instagram: z4mcuk
-
- Member
- Posts: 103
- Joined: Fri Jun 08, 2012 8:35 am
Vanne's lightweight/ interior modification thread
What are the stats so far; weight loss to date & performance improvement?