Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
M Badge left or right?
-
- Newbie
- Posts: 19
- Joined: Sat Jul 15, 2017 12:45 pm
M Badge left or right?
A Z parked next to me a few days ago, I noticed the badge was on a different side to mine. I googled it and found that they all seem to be on the left. Mine is the blue one. I bought as an ex demo in 2006. Anyone got any ideas why it would be that side?
- Attachments
-
- 20181214_231343.jpg (244.51 KiB) Viewed 725 times
-
Onlinebuzyg
- Legend
- Posts: 26516
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
M Badge left or right?
Enjoy your Coupe only kwerk On a real Zed, the key hole is on the right and on the ///M variant the badge sits proudly on the left?
- enzed4
- Lifer
- Posts: 3033
- Joined: Fri May 16, 2014 9:23 am
- Location: New Zealand
M Badge left or right?
I was going to say perhaps it had been debadged then someone attached a new ///M badge, but you mentioned it was ex-demo so should have been 'factory-fresh'. A bit unusual, but viva la difference
Gone: 2010 35i DCT
Gone: 2008 2.5Si Sport
-
- Member
- Posts: 382
- Joined: Sun Jun 11, 2017 3:37 pm
M Badge left or right?
I’ll check mine
- mcbeee
- Lifer
- Posts: 3309
- Joined: Tue Nov 10, 2009 3:13 pm
- Location: Chestermere, Alberta
M Badge left or right?
Your badge seems low and on the wrong side...and I don't see any keyholes ? My keyhole is chrome and quite visible. Not really performance issues so drive on and smile in your ///M.
Sold the Z4 M Roadster and a 911 Carrera S now I have a 2021 Z4 3.0i
- TomK
- Senior Member
- Posts: 2363
- Joined: Fri Jan 25, 2013 11:50 pm
- Location: West London
M Badge left or right?
Coupes have the keyhole within the BMW roundel
Looks more resolved (due to no keyhole) without any badge to my eyes. But I can't stand badges so maybe that's just me.TIS wrote: M Roadster / M Coupé:
Stick on top edge of adhesive tape (1) parallel to bottom edge of rear lid at distance (A).
Mark measurement (B) on top edge of adhesive tape (1).
Remove liner (protective strip for adhesive surface) from emblem.
Position emblem up against adhesive tape (1) and at measurement (B) and press down firmly.
Dimensions E85:
A = 76.5 mm
B = 172 mm
Dimensions E86:
A = 79 mm
B = 173 mm
MC[IB], CSL airbox, Schrick 288/280 cams, 4.44FD, UUC SSK, SS race cat back, AP CP9660[F]/5144[R] brakes, Apex ARC-8 with AR-1 or PS5, KW ClubSport 2-way, Turner spherical arms, PMC uniball rtab, VB engine mounts, Rogue pulleys & RSMs, Tillett B6, half cage