Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Wing repeater badges

"M" Specific discussion
Post Reply
mad4slalom
Senior Member
Senior Member
Posts: 1833
Joined: Tue May 01, 2012 12:26 pm

Wing repeater badges

Post by mad4slalom » Sat Jun 23, 2018 8:16 pm

Hi all, my wing repeater roundalls are getting a little edgy, anyone replaced them? Do you go for just the badges ore replace the whole lamp as a unit, also oem or ebay/ amazon ? Ideas of prices , any recommendations appreciated. πŸ‘

crustyclown777
Member
Member
Posts: 170
Joined: Fri Jun 21, 2013 8:23 am
Location: Guildford

Wing repeater badges

Post by crustyclown777 » Sat Jun 23, 2018 11:02 pm

I replaced one of mine recently. Used a credit card to separate the badge from the lamp and removing the excess tape. Pretty straight forward process.
Purchased an OEM one to replace it with.
Z4MC Interlagos Blue
Instagram: z4mcuk

ErrErrminator
Member
Member
Posts: 567
Joined: Fri Mar 16, 2018 9:11 am

Wing repeater badges

Post by ErrErrminator » Sat Jun 23, 2018 11:29 pm

I bought a couple of 82mm bonnet/boot badges, ten pound for the pair from eBay. Just cut off the locating pins on the back and secure with silicone, or other suitable adhesive. Perfect fit.

mad4slalom
Senior Member
Senior Member
Posts: 1833
Joined: Tue May 01, 2012 12:26 pm

Wing repeater badges

Post by mad4slalom » Sat Jun 23, 2018 11:57 pm

ErrErrminator wrote: ↑Sat Jun 23, 2018 11:29 pm I bought a couple of 82mm bonnet/boot badges, ten pound for the pair from eBay. Just cut off the locating pins on the back and secure with silicone, or other suitable adhesive. Perfect fit.
Ok, thanks did you remove old badge first or stick on top ?

mad4slalom
Senior Member
Senior Member
Posts: 1833
Joined: Tue May 01, 2012 12:26 pm

Wing repeater badges

Post by mad4slalom » Sat Jun 23, 2018 11:57 pm

crustyclown777 wrote: ↑Sat Jun 23, 2018 11:02 pm I replaced one of mine recently. Used a credit card to separate the badge from the lamp and removing the excess tape. Pretty straight forward process.
Purchased an OEM one to replace it with.
thanks for that. πŸ‘

ErrErrminator
Member
Member
Posts: 567
Joined: Fri Mar 16, 2018 9:11 am

Wing repeater badges

Post by ErrErrminator » Sun Jun 24, 2018 8:50 am

mad4slalom wrote: ↑Sat Jun 23, 2018 11:57 pm Ok, thanks did you remove old badge first or stick on top ?
I fitted mine to new repeaters, but you will definitely need to remove the old badges first. Use a blunt knife and slowly work it in underneath the badge and ease it up carefully.

Post Reply