Hi,
my Z4MC has developed a bit of a misfire/reluctance to pick up revs low down in the range. According to my indy it is likely to be caused by an ignition coil being on the way out. I am likely getting ahead of myself here but I started looking at part numbers in case the issue is confirmed. I looked at Real OEM:
http://www.realoem.com/bmw/enUS/showpar ... Id=12_1104
and it looks like the BOSCH part(s) #12131712219 and #12137594937 have been discontinued and
the one manufactured by ELDOR #12138657273 is the correct one.
The discontinued ones seem to still be available on the market...Can anyone confirm or share what ignition coil they fitted (recently)?
Thanks in advance,
A
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
ignition coils - which is the right part number?
- Attilio
- Member
- Posts: 763
- Joined: Tue Oct 31, 2017 11:11 am
- Location: Dublin
ignition coils - which is the right part number?
Z4M Coupe, Interlagos blue, black leather, piano black, stubby, OEM CSLs, evolve intake, cup holders...pretty much stock
2019 Toyota Corolla hybrid 2.0L - new daily drive
2019 Toyota Corolla hybrid 2.0L - new daily drive
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
ignition coils - which is the right part number?
Either should be fine. I used Bosch just over a year ago, Eldor did replace them as OEM and from what I’ve read are very good quality so either / or would be fine I imagine though I’d get Eldor preferably.Attilio wrote: ↑Wed Jan 03, 2018 7:56 pm Hi,
my Z4MC has developed a bit of a misfire/reluctance to pick up revs low down in the range. According to my indy it is likely to be caused by an ignition coil being on the way out. I am likely getting ahead of myself here but I started looking at part numbers in case the issue is confirmed. I looked at Real OEM:
http://www.realoem.com/bmw/enUS/showpar ... Id=12_1104
and it looks like the BOSCH part(s) #12131712219 and #12137594937 have been discontinued and
the one manufactured by ELDOR #12138657273 is the correct one.
The discontinued ones seem to still be available on the market...Can anyone confirm or share what ignition coil they fitted (recently)?
Thanks in advance,
A
Not so sure on the diagnostic though, what makes him think ignition coils is causing that issue? Not saying it isn’t but...based on what?
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
- Attilio
- Member
- Posts: 763
- Joined: Tue Oct 31, 2017 11:11 am
- Location: Dublin
ignition coils - which is the right part number?
Hi,AndyBeech wrote: ↑Thu Jan 04, 2018 2:21 pmEither should be fine. I used Bosch just over a year ago, Eldor did replace them as OEM and from what I’ve read are very good quality so either / or would be fine I imagine though I’d get Eldor preferably.
Not so sure on the diagnostic though, what makes him think ignition coils is causing that issue? Not saying it isn’t but...based on what?
thanks for the info. It would seem that the "old" Bosch ones are still available and are in EU while the Eldor seem to be available via USA only (at least on ebay).
Going to get the car properly diagnosed late next week (travelling for work prevents earlier appointment) so hopefully he will be able to determine the cause (fingers crossed not an expensive one)
Z4M Coupe, Interlagos blue, black leather, piano black, stubby, OEM CSLs, evolve intake, cup holders...pretty much stock
2019 Toyota Corolla hybrid 2.0L - new daily drive
2019 Toyota Corolla hybrid 2.0L - new daily drive
-
- Senior Member
- Posts: 1913
- Joined: Mon Sep 08, 2008 8:42 am
- Location: SW London
ignition coils - which is the right part number?
Hello. Did you get this diagnosed and was it a fried coil pack? Which part number did you go for in end of that was the case?
I took my ///M out yesterday to take to a friends wedding, and she repaid me by developing knackered coil pack symptoms 30 mins into the journey !! I drive her less than 1000 a year !!!
I’ve read the fault codes and I’m getting “29D0” - combustion misfires, cylinder 4.
On ecp I see both the Bosch and Bremi ignition coils but not Eldor.
I took my ///M out yesterday to take to a friends wedding, and she repaid me by developing knackered coil pack symptoms 30 mins into the journey !! I drive her less than 1000 a year !!!
I’ve read the fault codes and I’m getting “29D0” - combustion misfires, cylinder 4.
On ecp I see both the Bosch and Bremi ignition coils but not Eldor.
Z4MC | Midnight Blue | OEM CSL's + MPSS | Extended Light Sepang Leather | Folding Mirrors | Stubby| BT | Prof Nav | DSP HiFi | Intravee | Privacy | Illuminated ZHP…
-
- Senior Member
- Posts: 1913
- Joined: Mon Sep 08, 2008 8:42 am
- Location: SW London
ignition coils - which is the right part number?
Anyone ?
Z4MC | Midnight Blue | OEM CSL's + MPSS | Extended Light Sepang Leather | Folding Mirrors | Stubby| BT | Prof Nav | DSP HiFi | Intravee | Privacy | Illuminated ZHP…