When replacing my roof pump, I took the plastic fitting off the old pump, and couldn’t work out how it operated, but now I know it’s missing a part.
What I have looks like this:
So the bit that the cable attaches to that then presses on the pump release plunger isn’t there.
Does anyone have the part, or the whole plastic fitting complete that the release cable attaches to.
Cheers
Al
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
WANTED Inside part from roof release
-
- Member
- Posts: 110
- Joined: Wed Jun 09, 2021 5:10 pm
- Location: Oldbury, West Midlands
Inside part from roof release
BMW newbie, 2003 E85 2.5 SE - but after 10 Discoveries this ought to be a walk in the park
- Number5
- Lifer
- Posts: 6025
- Joined: Tue Sep 24, 2013 7:34 pm
- Location: Bristol M4/M5
Inside part from roof release
I’ll have a look. I may have one in my box of tricks
Alpina Roadster #307
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
-
- Member
- Posts: 110
- Joined: Wed Jun 09, 2021 5:10 pm
- Location: Oldbury, West Midlands
Inside part from roof release
Ok cheers
Al
Al
BMW newbie, 2003 E85 2.5 SE - but after 10 Discoveries this ought to be a walk in the park