Aluminium trim set

eddiemunster · Post by **eddiemunster** » Thu Jan 16, 2020 11:03 pm

Hi

I'm after the aluminium trim set, ideally unmarked and from a non-smoking interior. I currently have the "wooden" trim, in perfect condition, so it someone wants to trade or swap when we can sort something out.

Thanks

JP2.5SI · Post by **JP2.5SI** » Thu Jan 16, 2020 11:12 pm

I have a set available!

Funnily enough, the centre console piece is due to be coming out this Sunday and replaced with a carbon fibre wrapped piece!

JINGLE · Post by **JINGLE** » Thu Jan 16, 2020 11:13 pm

I also have a set as I removed mine when I replaced with real carbon fibre set not so long back.

How much are these worth?

eddiemunster · Post by **eddiemunster** » Thu Jan 16, 2020 11:19 pm

JP2.5SI wrote: ↑Thu Jan 16, 2020 11:12 pm I have a set available!

Funnily enough, the centre console piece is due to be coming out this Sunday and replaced with a carbon fibre wrapped piece!

So, as long as it's unmarked, how much?

Also, how easy is the trim to get off?

JP2.5SI · Post by **JP2.5SI** » Thu Jan 16, 2020 11:24 pm

If I recall the pieces do show some signs of ageing but no serious marks; I can supply photos in the morning.

I’ll happily take £50 for the set. I think that’s what I paid on here not too long ago for the equivalent

Removing the dash trim is a bit of a faff but not hard. Centre console seems to be time consuming...a job I’ve put off for a couple of months

eddiemunster · Post by **eddiemunster** » Thu Jan 16, 2020 11:26 pm

JP2.5SI wrote: ↑Thu Jan 16, 2020 11:24 pm If I recall the pieces do show some signs of ageing but no serious marks; I can supply photos in the morning.

I’ll happily take £50 for the set. I think that’s what I paid on here not too long ago for the equivalent

Removing the dash trim is a bit of a faff but not hard. Centre console seems to be time consuming...a job I’ve put off for a couple of months

Cool.........

Jl-c · Post by **Jl-c** » Fri Jan 17, 2020 9:43 am

Where are you? I’ve got an aluminium set in the garage I will happily swap for a wood set.

eddiemunster · Post by **eddiemunster** » Fri Jan 17, 2020 9:46 am

Jl-c wrote: ↑Fri Jan 17, 2020 9:43 am Where are you? I’ve got an aluminium set in the garage I will happily swap for a wood set.

I'm in the Midlands, near Leicester.....

SiJar · Post by **SiJar** » Fri Jan 17, 2020 9:50 am

Funny old thing my current Z4MC has a wood dash which I hate so purchased an old set which is being hydro dipped as we speak in a carbon fibre effect (mat not gloss).

Jl-c · Post by **Jl-c** » Fri Jan 17, 2020 9:54 am

eddiemunster wrote: ↑Fri Jan 17, 2020 9:46 am
Jl-c wrote: ↑Fri Jan 17, 2020 9:43 am Where are you? I’ve got an aluminium set in the garage I will happily swap for a wood set.
I'm in the Midlands, near Leicester.....

Not a million miles away then, Leicester to Telford. I’ll take some pictures and email them to you. PM me an e-mail address please.

Z4-forum.com

Z4-forum.com

WANTED Aluminium trim set