Z4M 1-OEM exhaust tip

Cad Monkey · Post by **Cad Monkey** » Wed Sep 18, 2019 11:10 am

Hi, has anyone got a spare Z4M OEM exhaust tip in good condition that I can buy?

Alternatively, could Machine Monkey drop me a pm with contact details and cost of replacing all 4 tailpipes, I'm unable to pm due to being a newbie, many thanks.

stuartC · Post by **stuartC** » Wed Sep 18, 2019 6:13 pm

Is the 'M' the same as the Si ? If so I have a couple available.

Post by **srhutch** » Wed Sep 18, 2019 8:53 pm

stuartC wrote: ↑Wed Sep 18, 2019 6:13 pm Is the 'M' the same as the Si ? If so I have a couple available.

Nope, they are different.

Post by **srhutch** » Wed Sep 18, 2019 8:55 pm

Could go for an upgrade. I bought these, think was around £140

PS I’m keeping the originals.

: 8621CF71-CD12-4FF4-BF49-0D890D36A20C.jpeg (318.47 KiB) Viewed 914 times

Post by **srhutch** » Wed Sep 18, 2019 8:59 pm

: ABD299CD-567B-47E9-9017-93D5210AE88A.jpeg (246.29 KiB) Viewed 912 times

: 56F9F483-E727-4D1E-844C-AAD426FDCC6D.jpeg (268.49 KiB) Viewed 912 times

SiJar · Post by **SiJar** » Thu Sep 19, 2019 7:30 am

I like them just what I’m looking for. where did you get them from and are they easy to fit? I would be interested in these if they are still available?

stuartC · Post by **stuartC** » Thu Sep 19, 2019 9:40 am

srhutch wrote: ↑Wed Sep 18, 2019 8:53 pm Nope, they are different.

Ah right, thought that might be the case. Cheers

Post by **srhutch** » Thu Sep 19, 2019 6:36 pm

SiJar wrote: ↑Thu Sep 19, 2019 7:30 am I like them just what I’m looking for. where did you get them from and are they easy to fit? I would be interested in these if they are still available?

The sellers is on m3cutters. I’ll see if I can find the thread, he did a group buy but also listed some on eBay.

Post by **srhutch** » Thu Sep 19, 2019 6:38 pm

New group buy thread. You might want to contact the seller (nvum3) to see if you can purchase direct.

https://forums.m3cutters.co.uk/threads/ ... 19.207320/

SiJar · Post by **SiJar** » Thu Sep 19, 2019 7:48 pm

Many thanks

griffnut · Post by **griffnut** » Fri Sep 20, 2019 4:07 am

stuartC wrote: ↑Wed Sep 18, 2019 6:13 pm Is the 'M' the same as the Si ? If so I have a couple available.

I,m interested if you want to sell them.
Thanks, Bill.

Cad Monkey · Post by **Cad Monkey** » Fri Sep 20, 2019 8:05 pm

now sorted, many thanks for your responses

Post by **srhutch** » Fri Sep 20, 2019 8:57 pm

Cad Monkey wrote: ↑Fri Sep 20, 2019 8:05 pm now sorted, many thanks for your responses

Did you get one, or upgrade?

Cad Monkey · Post by **Cad Monkey** » Sat Sep 21, 2019 9:57 am

srhutch wrote: ↑Fri Sep 20, 2019 8:57 pm
Cad Monkey wrote: ↑Fri Sep 20, 2019 8:05 pm now sorted, many thanks for your responses
Did you get one, or upgrade?

I’ve decided to fabricate some replacements which will be turned from aluminium tube and then cerakoted black to match the rear boxes. I have already modified the rear boxes in an effort to improve the exhaust note and will post some pics of the whole project once completed.
Once again thanks for all your replies.

stuartC · Post by **stuartC** » Fri Sep 27, 2019 11:31 am

griffnut wrote: ↑Fri Sep 20, 2019 4:07 am
stuartC wrote: ↑Wed Sep 18, 2019 6:13 pm Is the 'M' the same as the Si ? If so I have a couple available.
I,m interested if you want to sell them.
Thanks, Bill.

Hi Bill,

Sorry for delay, been super busy with workl. I'll get some images sorted out so you can have a look.

Cheers

Z4-forum.com

Z4-forum.com

NO LONGER WANTED Z4M 1-OEM exhaust tip