WANTED CSL Reps & Tyres

[schwin]

Anyone thinking of selling theirs, I’d be very interested. Especially if you’re based in the southeast.

Thanks

[R60BBA]

Just buy them from CM Wheels and get a set of fresh rubber off Blackcircles.

CM Wheels also offers discount to forum members (which usually covers the cost of a set of new Bimecc lugs and bolts).

I’ve used him twice (on 2 different cars) and can vouch for both the quality in merch and service.

[Clobber]

Which type R6obba?

[R60BBA]

Which type R6obba?

Huh?

[Clobber]

Which CSL reps do you recommend? I saw some 18" on a z4c today which looked good, I was worried that only 19s would work....

[R60BBA]

Which CSL reps do you recommend? I saw some 18" on a z4c today which looked good, I was worried that only 19s would work....

Really depends on your preference.

19s for show.

18s for go.

I had 18” CM 437Ms on my Z4 which were lighter and wider than stock 18” MV2s and so my ride was improved.

I currently have 19” CM CSLs on my M3 which are lighter and wider than stock 19” 67Ms so grip is improved, however I also have CSL tyre sizes which use a lower profile and so on bumpy roads I notice a slight decrease in comfort.

When I take my M3 on track next year I will invest in a cheap set of square 18” 67Ms.

[shuey]

Curious to see both 18 CSL reps vs 19 CSL reps on the same or similar coupe... if anyone has pics of both, please upload

[Silverzedtom]

If your in the southeast it might be worth popping over to BM Autosport in Eastbourne.

That’s where I got my atomic reps. They have a 33 offset on the rear so the concave is not far off the genuines (et27)

[R60BBA]

Curious to see both 18 CSL reps vs 19 CSL reps on the same or similar coupe... if anyone has pics of both, please upload

Brucietheboy on Instagram has 18” Riva DTMs on his Coupe.

[Attilio]

Curious to see both 18 CSL reps vs 19 CSL reps on the same or similar coupe... if anyone has pics of both, please upload

Brucietheboy on Instagram has 18” Riva DTMs on his Coupe.

Thanks R60BBA,

I am debating whether to go 19" or stick to 18" and I am more inclined to stick to the 18" to avoid a crashy ride, but would like to "see" what the 18" look like. Thanks for the pointer to brucietheboy on Instagram.

Attilio

[schwin]

Just buy them from CM Wheels and get a set of fresh rubber off Blackcircles.

CM Wheels also offers discount to forum members (which usually covers the cost of a set of new Bimecc lugs and bolts).

I’ve used him twice (on 2 different cars) and can vouch for both the quality in merch and service.

I was considering that but I’m rolling on OEM suspension so I’m a little concerned it’s going to look like a Truck. If I can save some money getting secondhand that would be ideal.

I’m also wanting 19” - just looks so good

[R60BBA]

Curious to see both 18 CSL reps vs 19 CSL reps on the same or similar coupe... if anyone has pics of both, please upload

Brucietheboy on Instagram has 18” Riva DTMs on his Coupe.

Thanks R60BBA,

I am debating whether to go 19" or stick to 18" and I am more inclined to stick to the 18" to avoid a crashy ride, but would like to "see" what the 18" look like. Thanks for the pointer to brucietheboy on Instagram.

Attilio

Tbh from driving with 19s on an M3 I wouldn’t advise 19s on a Z4.

But people do manage it. I guess it just depends on the tyre size you opt for and your suspension set up.

I believe Mr Wilks is the best person to speak to on this matter.

[Clobber]

Probably depends on the condition of the roads near you too... Mine are shockingly bad...

[mpm]

Looney said that he will be putting a set up for sale

[shuey]

Thanks robba- yeh I’m sticking with my 18s until I have the funds for M coupe

Curious to see both 18 CSL reps vs 19 CSL reps on the same or similar coupe... if anyone has pics of both, please upload

Brucietheboy on Instagram has 18” Riva DTMs on his Coupe.