Apex EC7 Alloys - Great condition

the_sweenie · Post by **the_sweenie** » Sat Dec 08, 2018 8:43 pm

I have for sale a full set of Apex EC7 alloy wheels which were previously sold to me on the forum. Reason for selling is there is minor rubbing on the arches of my E86 3.0si coupe when fitted to the car. Previous owner had these on a Z4M E85. Did consider changing tyre sizes, arch rolling etc after advice from other forum members, but have decided I will sell them and look to purchase another set of alloys at some point in the future and stick with my original alloys for the time being.

Fitments are as follows 18x 8.5 ET35 fronts and
18x9.5 ET22 rears. Not sure if these will fit on a Z4M without rubbing so please check as I'm unable to advise.

Wheels are in great condition, only one has a slight kerb mark but has been touched up.

Tyres are Vredestein Ultrac in 225/45/18 and 255/40/18s. Rears have approx 3-4mm tread remaining. Fronts have approx 4-5mm tread remaining.

Collection only from High Wycombe, Buckinghamshire or happy for buyer to arrange their own courier but I will not except any damage or loss if this is agreed.

Looking for £700 which is the price I paid for them.

MrPT · Post by **MrPT** » Sat Dec 08, 2018 10:55 pm

the_sweenie wrote: ↑Sat Dec 08, 2018 8:43 pmFitments are as follows 18x 8.5 ET35 fronts and
18x9.5 ET22 rears. Not sure if these will fit on a Z4M without rubbing so please check as I'm unable to advise.

Perfect for an M. Amazing price too.

Ed Doe · Post by **Ed Doe** » Sat Dec 08, 2018 11:59 pm

Christ it's not far off double that for the alloys alone from the likes of tegiwa! Bargain for someone, and a great saving on unsprung weight too

the_sweenie · Post by **the_sweenie** » Sun Dec 09, 2018 12:43 pm

Thank you for confirming the wheel fitments. Gutted they rub on the arches as looked really good on my car but don't want the hassle of changing tyres etc. Price is what I paid on the forum to the previous seller.

MrPT wrote: ↑Sat Dec 08, 2018 10:55 pm
the_sweenie wrote: ↑Sat Dec 08, 2018 8:43 pmFitments are as follows 18x 8.5 ET35 fronts and
18x9.5 ET22 rears. Not sure if these will fit on a Z4M without rubbing so please check as I'm unable to advise.
Perfect for an M. Amazing price too.

Attilio · Post by **Attilio** » Mon Dec 10, 2018 10:52 am

Hi OP,

great wheels!

I might be interested. I sent you a PM with details to start a direct conversation.

Best regards
Attilio

Clobber · Post by **Clobber** » Wed Dec 12, 2018 12:08 pm

Is your coupe lowered or on standard sports suspension?

the_sweenie · Post by **the_sweenie** » Wed Dec 12, 2018 12:19 pm

Clobber wrote: ↑Wed Dec 12, 2018 12:08 pm Is your coupe lowered or on standard sports suspension?

The car is on standard suspension from factory with original springs and shocks

Clobber · Post by **Clobber** » Wed Dec 12, 2018 1:42 pm

That's a shame then it because they would rub on my e86 also

the_sweenie · Post by **the_sweenie** » Fri Dec 14, 2018 12:29 pm

Bump - Still available

Thunderous One · Post by **Thunderous One** » Fri Dec 14, 2018 4:09 pm

Ditto, Shame as would rub on mine
Cracking looking set of alloys

Ewazix · Post by **Ewazix** » Fri Dec 14, 2018 4:24 pm

Wheels and offsets baffle me slightly, how is it they rub on an Si with standard suspension but not on an ///M ?

mr wilks · Post by **mr wilks** » Fri Dec 14, 2018 6:30 pm

Ewazix wrote: ↑Fri Dec 14, 2018 4:24 pm Wheels and offsets baffle me slightly, how is it they rub on an Si with standard suspension but not on an ///M ?

ZM alloys have stock offset of et 42 F & Et30 R as opposed to non M et 47 F & et50 R.

Ewazix · Post by **Ewazix** » Fri Dec 14, 2018 6:51 pm

mr wilks wrote: ↑Fri Dec 14, 2018 6:30 pm
Ewazix wrote: ↑Fri Dec 14, 2018 4:24 pm Wheels and offsets baffle me slightly, how is it they rub on an Si with standard suspension but not on an ///M ?
ZM alloys have stock offset of et 42 F & Et30 R as opposed to non M et 47 F & et50 R.

Cheers, got it now

Z4-forum.com

Z4-forum.com

SOLD Apex EC7 Alloys - Great condition