SOLD Z4M bits, B12 Kit, Eventuri, Breyton/Hartge 19in alloy wheels, F10 M5 ZHP SOLD

[bmwaddict]

I'm selling my Z4MC so have a few bits for sale.

A brand new in box Bilstein B12 Kit for sale, consisting of Eibach Springs (20mm front, 10mm rear), and Bilstein B8 shock absorbers, never fitted, as new.
£700 collected, quite heavy so won't be cheap to post but I'm willing to arrange postage if buyer pays.
SORRY NOW SOLD

IMAG2348.jpg (114.25 KiB) Viewed 3167 times

IMAG2347.jpg (153.82 KiB) Viewed 3167 times

Eventuri kit, still on the car but it's the black version, in vgc, will be supplied in original box.
£450 collected or can arrange postage. SOLD


F10 M5 ZHP illuminated gearknob and gaitor, in perfect condition never fitted, £120 collected or can post. SOLD


Breyton Inspiration 9/10x19 et38 all round deep dish alloys, very rare to find these now let alone this staggered set up, they were refurbished with diamond cut dishes at BJV engineering in February/March '18. The front and rear left wheels have some light curbing, I will have these professionally refurbished before sale if full asking price is met, if not Ill take £250 off the price.
Unfortunately I only have 2 centre caps which are brand new with the protective film still on.
Very well made lightweight wheels.
Tyres fitted are Pirelli P Zero 245/35/19 on the front and GY Eagle F1 275/30/19 rears, all around 6mm, I can measure them and take pics for any potential buyers.
£1200 ONO collected SOLD

IMAG2093.jpg (169.72 KiB) Viewed 3167 times

IMAG2088.jpg (232.6 KiB) Viewed 3167 times

IMAG2087.jpg (156.9 KiB) Viewed 3167 times

IMAG2086.jpg (261.76 KiB) Viewed 3167 times

IMAG2112.jpg (276.67 KiB) Viewed 3167 times

IMAG2111.jpg (277.48 KiB) Viewed 3167 times

Hartge Classic 19in split rims, e39 centre bore fitment with spigot rings to run on any BMW, 8.5j et40 front, 9.5j et22 rear, fitted with MPSS 235/35/19 front which are down to the blocks and will need changing, and GY Eagle F1 rears 265/30/19 which have a few mm left.
These were over £2000 new in the 90s and are very well made.
The wheels have had a cheap refurb on the dishes at some point and it has almost completely flaked off, so require a full refurb, but they are all straight and true with no welds or buckles. They have flat titanium split rim bolts fitted and original metal genuine centre caps which can be refurbished too.
£500 ono collected. SOLD.

IMAG1585.jpg (176.42 KiB) Viewed 3167 times

IMAG1591_BURST002_COVER.jpg (187.86 KiB) Viewed 3167 times

OEM back boxes, in average condition, have done 100k, will be supplied with flange repair kit from I6 Automotive.
£200 ono collected (very heavy). PROVISIONALLY SOLD


A set of oem springs, have done 25k, £40 ono collected. SOLD


Genuine E46 M3 strut brace, nuts and top caps, in decent condition, paint is not perfect.
£120 collected SOLD


Located near Tring on the Herts/Bucks border by the A41, 15 mins from Jct. 20 M25.

Many thanks.

[Yorkie Z]

Some juicy tempting bits up for grabs. GLWTS

[Tcochrane92]

Must. Not. Be. Tempted.

[Mr Z]

Hi, would you accept £100 inc p&p for the ZHP?

[bmwaddict]

Hi, would you accept £100 inc p&p for the ZHP?

Hi, mate, I'll do £100 plus postage. Shouldn't be more than a few quid.
Please bear in mind this is a F10 M5 ZHP which has the gator attached as one piece so suited for the Z4M only unless you were to do some butchering.

[Darkangelv2]

Great price on the Eventuri - want one for my si so badly!

[Mr Z]

I assume I would be able to simply remove the knob and wire from yours and replace mine, using my existing gator??
I already have a ZHP but would love to change it for am illuminated version and not necessarily swap the gators.

[dan yeates]

Hmm, whether to go for the Eventuri…..

[Mr Z]

I assume I would be able to simply remove the knob and wire from yours and replace mine, using my existing gator??
I already have a ZHP but would love to change it for am illuminated version and not necessarily swap the gators.

Having done a quick Google search it seems as though the knob & gator are very well attached and somewhat difficult to separate without potential damage to the shifter! If someone confirms this then I think I'll leave it.

[bmwaddict]

I assume I would be able to simply remove the knob and wire from yours and replace mine, using my existing gator??
I already have a ZHP but would love to change it for am illuminated version and not necessarily swap the gators.

Having done a quick Google search it seems as though the knob & gator are very well attached and somewhat difficult to separate without potential damage to the shifter! If someone confirms this then I think I'll leave it.

I thought this was the case.

[mmm-five]

Hmm, whether to go for the Eventuri…..

Go on. You won't find one cheaper

[Mr Z]

I assume I would be able to simply remove the knob and wire from yours and replace mine, using my existing gator??
I already have a ZHP but would love to change it for am illuminated version and not necessarily swap the gators.

Having done a quick Google search it seems as though the knob & gator are very well attached and somewhat difficult to separate without potential damage to the shifter! If someone confirms this then I think I'll leave it.

I thought this was the case.

Thanks, I'm not prepared to risk damaging it. GLWTS

[Bodyboarder]

£100 for the strut brace ? Could you possible put some pics up ?

Thanks

[bmwaddict]

£100 for the strut brace ? Could you possible put some pics up ?

Thanks

I'll do £100 collected yes mate. I'll take some pics once I'm home.

[Bodyboarder]

£100 for the strut brace ? Could you possible put some pics up ?

Thanks

I'll do £100 collected yes mate. I'll take some pics once I'm home.

Ah balls ... should have said , would need to be delivered