AP-Racing 6 Piston Kit CP5575-1004 Calipers, Pads & Discs

X-S-Z · Post by **X-S-Z** » Tue Jul 10, 2018 12:21 pm

AP Racing CP5575-1004

http://www.apracing.com/product_details ... k_pad.aspx

The calipers have around 12,000 miles on them, not heavy use. In perfect working order when removed from car (BMW Z4M) before sale last month. The discs are just use-able, they have been an advisory on previous MoT but not a fail point. The pads are new Pagid PS29 with around 2,000 miles on them.

The set is around £2,665 new, brake pads are around £250 for the set.

https://www.vagbremtechnic.com/ap-racin ... 5575-1004/

Looking for £1,250 o.n.o. with buyer collecting or arranging postage.

mmm-five · Post by **mmm-five** » Tue Jul 10, 2018 12:41 pm

Good luck with the sale, these shouldn’t be around for long

Just clarifying, as I’m sorted myself

As this is an e43 M3 specific kit, can you confirm these fit a standard Z4M front wheel, without any mods/spacers/etc., as I’ve seen some warnings on M3-Cutters/Z-Post about small differences between the 2 kits (different disc & bracket part numbers).

For reference, the Z4M kit is CP5575-1010.

hopz121 · Post by **hopz121** » Tue Jul 10, 2018 1:03 pm

Any pictures?

Where are you located?

also can you confirm this is defiantly the E46 M3 kit or is it a Z4M kit?

X-S-Z · Post by **X-S-Z** » Tue Jul 10, 2018 1:25 pm

mmm-five wrote: ↑Tue Jul 10, 2018 12:41 pm As this is an e43 M3 specific kit, can you confirm these fit a standard Z4M front wheel, without any mods/spacers/etc., as I’ve seen some warnings on M3-Cutters/Z-Post about small differences between the 2 kits (different disc & bracket part numbers).

For reference, the Z4M kit is CP5575-1010.

Correct they are M3 ones, not Z4 ones.

X-S-Z · Post by **X-S-Z** » Tue Jul 10, 2018 1:26 pm

hopz121 wrote: ↑Tue Jul 10, 2018 1:03 pm Any pictures?

Where are you located?

also can you confirm this is defiantly the E46 M3 kit or is it a Z4M kit?

Pictures to follow... (I am out of country but my friend has them and will send me shortly then I'll post)

The brakes are located in Falkirk just now (I am not).

Yes, 100% E46 M3 kit.

BMWZ4MC · Post by **BMWZ4MC** » Tue Jul 10, 2018 1:36 pm

I’m running an E46 M3 AP Racing BBK front and rear on my Z4MC. The fronts need a 2mm washer under each of the caliper mounting bolts, the rears fit without shims.
I bought my BBK from Fishy Dave. He sought and was given approval by an engineer at AP for the use of washers as shims for this purpose when he purchased the BBK.
No wheel spacers are required with 18 or 19 inch wheels.
GLWTS

X-S-Z · Post by **X-S-Z** » Tue Jul 10, 2018 1:39 pm

BMWZ4MC wrote: ↑Tue Jul 10, 2018 1:36 pm I’m running an E46 M3 AP Racing BBK front and rear on my Z4MC. The fronts need a 2mm washer under each of the mounting bolts, the rears fit without shims.
I bought my BBK from Fishy Dave. He sought and was given approval by an engineer at AP for the use of washers as shims for this purpose when he purchased the BBK.
GLWTS

Thanks! In this case I must also have the washers lying with the box of bits... when the photos arrive it'll confirm. So they're supplied ready to fit

BMWZ4MC · Post by **BMWZ4MC** » Tue Jul 10, 2018 1:41 pm

My front calipers came with eight identical washers, four sit under the heads of the four caliper bolts whilst the other four washers are the shims.

Fishy Dave · Post by **Fishy Dave** » Tue Jul 10, 2018 3:07 pm

Bear in mind that the M3 disc bells are slightly different too. I had a local company make me a 2mm shim to fit between the bell and the hub, otherwise the disc is too close to the bottom ball joint. This solution worked just fine up to the point I bought Z4M specific bells from Reyland.

X-S-Z · Post by **X-S-Z** » Tue Jul 10, 2018 4:16 pm

Fishy Dave wrote: ↑Tue Jul 10, 2018 3:07 pm Bear in mind that the M3 disc bells are slightly different too. I had a local company make me a 2mm shim to fit between the bell and the hub, otherwise the disc is too close to the bottom ball joint. This solution worked just fine up to the point I bought Z4M specific bells from Reyland.

Ah yes that reminds me, there was a 2mm spacer under the hub... easy enough to get machined up.

mmm-five · Post by **mmm-five** » Tue Jul 10, 2018 5:47 pm

This was the reason for my query...

Going into a purchase fully informed is fine, but you really don’t want to buy a kit, arrange to get it fitted, and then find out it won’t fit because you need something machined!

hopz121 · Post by **hopz121** » Tue Jul 10, 2018 9:55 pm

Interested after seeing images

bradz · Post by **bradz** » Tue Jul 10, 2018 11:32 pm

Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies

TomK · Post by **TomK** » Wed Jul 11, 2018 10:37 am

bradz wrote: ↑Tue Jul 10, 2018 11:32 pm Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies

Unfortunately about £240 I think.

Fishy Dave · Post by **Fishy Dave** » Wed Jul 11, 2018 3:24 pm

TomK wrote: ↑Wed Jul 11, 2018 10:37 am
bradz wrote: ↑Tue Jul 10, 2018 11:32 pm Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies
Unfortunately about £240 I think.

I can't remember the exact price but that does sound about right, they were cheaper than going direct to AP.

Z4-forum.com

Z4-forum.com

SOLD AP-Racing 6 Piston Kit CP5575-1004 Calipers, Pads & Discs