ZHP/clubsport knob

z4pilot · Post by **z4pilot** » Wed Jan 24, 2018 11:23 am

I can confirm that changing over the logo is an easy job - did it on mine. I left the knob on a radiator for a bit to soften the adhesive and then used a small screwdriver to lever the 5 speed logo off. Just be careful not to lever too hard against the edge of the leather and mark it. I went in at one of the joins to avoid that. Ebay replacement had a 3m type tape on the back and fitted perfectly.

GLWTS

jamie_z4 · Post by **jamie_z4** » Wed Jan 24, 2018 11:35 am

Cheers Sean

greg81 · Post by **greg81** » Wed Jan 24, 2018 1:49 pm

I'd swap a 6 speed badge from mine for the 5 speed one if that helps anyone. I'm currently fibbing about my number of gears

Coffee331 · Post by **Coffee331** » Wed Jan 24, 2018 1:53 pm

I'd offer £40 if that's any use to you

Mr Z · Post by **Mr Z** » Wed Jan 24, 2018 9:25 pm

z4pilot wrote: ↑Wed Jan 24, 2018 11:23 amI can confirm that changing over the logo is an easy job - did it on mine. I left the knob on a radiator for a bit to soften the adhesive and then used a small screwdriver to lever the 5 speed logo off. Just be careful not to lever too hard against the edge of the leather and mark it. I went in at one of the joins to avoid that. Ebay replacement had a 3m type tape on the back and fitted perfectly.

GLWTS

Do you have a link to purchasing a 6 speed logo

greg81 · Post by **greg81** » Wed Jan 24, 2018 11:19 pm

Mr Z wrote: ↑Wed Jan 24, 2018 9:25 pm
z4pilot wrote: ↑Wed Jan 24, 2018 11:23 amI can confirm that changing over the logo is an easy job - did it on mine. I left the knob on a radiator for a bit to soften the adhesive and then used a small screwdriver to lever the 5 speed logo off. Just be careful not to lever too hard against the edge of the leather and mark it. I went in at one of the joins to avoid that. Ebay replacement had a 3m type tape on the back and fitted perfectly.

GLWTS
Do you have a link to purchasing a 6 speed logo

Happy to straight swap. Can send you photos

Mr Z · Post by **Mr Z** » Thu Jan 25, 2018 12:05 am

greg81 wrote: ↑Wed Jan 24, 2018 11:19 pm
Mr Z wrote: ↑Wed Jan 24, 2018 9:25 pm
z4pilot wrote: ↑Wed Jan 24, 2018 11:23 amI can confirm that changing over the logo is an easy job - did it on mine. I left the knob on a radiator for a bit to soften the adhesive and then used a small screwdriver to lever the 5 speed logo off. Just be careful not to lever too hard against the edge of the leather and mark it. I went in at one of the joins to avoid that. Ebay replacement had a 3m type tape on the back and fitted perfectly.

GLWTS
Do you have a link to purchasing a 6 speed logo
Happy to straight swap. Can send you photos

OK, my 5 speed logo for your 6 speed logo. My car is in the garage until mid next week tho. They appear simply to remove and re-attach?

Coffee331 · Post by **Coffee331** » Thu Jan 25, 2018 12:15 am

Coffee331 wrote: ↑Wed Jan 24, 2018 1:53 pmI'd offer £40 if that's any use to you

Do I take the silence as a “no thanks”?

jamie_z4 · Post by **jamie_z4** » Thu Jan 25, 2018 9:56 am

Coffee331 wrote: ↑Thu Jan 25, 2018 12:15 am
Coffee331 wrote: ↑Wed Jan 24, 2018 1:53 pmI'd offer £40 if that's any use to you
Do I take the silence as a “no thanks”?

yeah, sorry to be a scrooge but its practically brand new. it'll cost me circa a 5er to post so holding out for asking price

Coffee331 · Post by **Coffee331** » Thu Jan 25, 2018 11:28 am

jamie_z4 wrote: ↑Thu Jan 25, 2018 9:56 am
Coffee331 wrote: ↑Thu Jan 25, 2018 12:15 am
Coffee331 wrote: ↑Wed Jan 24, 2018 1:53 pmI'd offer £40 if that's any use to you
Do I take the silence as a “no thanks”?
yeah, sorry to be a scrooge but its practically brand new. it'll cost me circa a 5er to post so holding out for asking price

Ok, I’ll go the full price

PayPal ok? Pm me your details and I’ll pay up and send you my postal address.

Mr Z · Post by **Mr Z** » Sun Jan 28, 2018 12:13 am

greg81 wrote: ↑Wed Jan 24, 2018 11:19 pm
Mr Z wrote: ↑Wed Jan 24, 2018 9:25 pm
z4pilot wrote: ↑Wed Jan 24, 2018 11:23 amI can confirm that changing over the logo is an easy job - did it on mine. I left the knob on a radiator for a bit to soften the adhesive and then used a small screwdriver to lever the 5 speed logo off. Just be careful not to lever too hard against the edge of the leather and mark it. I went in at one of the joins to avoid that. Ebay replacement had a 3m type tape on the back and fitted perfectly.

GLWTS
Do you have a link to purchasing a 6 speed logo
Happy to straight swap. Can send you photos

Are you still up for this?

Mr Z · Post by **Mr Z** » Sun Jan 28, 2018 11:13 pm

Mr Z wrote: ↑Sun Jan 28, 2018 12:13 am

Mr Z wrote: ↑Sun Jan 28, 2018 12:13 am
greg81 wrote: ↑Wed Jan 24, 2018 11:19 pm
Mr Z wrote: ↑Wed Jan 24, 2018 9:25 pm Do you have a link to purchasing a 6 speed logo
Happy to straight swap. Can send you photos
Are you still up for this?

PM sent to greg81

Z4-forum.com

Z4-forum.com