Silver folding mirrors (Z4)

Scaramanga · Post by **Scaramanga** » Fri Jan 05, 2018 6:46 pm

Hi All,
i had bought a set of folding mirrors for my Z4M but never got around to fitting.

They are silver and include a little module (which i think was needed for installation).

These were bought from ebay from a reputable seller, so i believe they are in full working condition but i cannot be sure. Unfortunately, I managed to break one mirror and the little plastic bracket when trying to remove.

Mirrors are generally in good condition, but i'd prefer whoever buys to come and collect as i don't want the hassle of posting and then receiving complaints.

£110 which i think is a good price, considering how much these would normally go for ?

Please note - the module is included but i believe you need a replacement switch.

Collection only from Reigate/Banstead area.

Thanks for looking!

flimper · Post by **flimper** » Fri Jan 05, 2018 8:08 pm

If my folding mirrors are only working intermittently what do I need to get them working properly again? Switches, modules, not really sure what I need

If what you have is what I need to get them working again then I'd be very interested

Scaramanga · Post by **Scaramanga** » Fri Jan 05, 2018 8:20 pm

I wish I could help but I’m not sure what the fault could be. To be honest, prefer not to split the set. Believe I have everything needed except the switch for the driver’s side which contains the button that activates the folding function.

DJz4 · Post by **DJz4** » Fri Jan 05, 2018 11:34 pm

pmd....if flimper doesn't want these.

flimper · Post by **flimper** » Sat Jan 06, 2018 4:25 pm

Happy to let DJz4 have first dibs as I'm not sure of what I need

Scaramanga · Post by **Scaramanga** » Sat Jan 06, 2018 4:42 pm

DJz4 wrote: ↑Fri Jan 05, 2018 11:34 pmpmd....if flimper doesn't want these.

Replied sir!

Scaramanga · Post by **Scaramanga** » Sat Jan 06, 2018 4:42 pm

flimper wrote: ↑Sat Jan 06, 2018 4:25 pmHappy to let DJz4 have first dibs as I'm not sure of what I need

Thanks! Have replied to DJz4.

DJz4 · Post by **DJz4** » Sat Jan 06, 2018 7:42 pm

flimper wrote: ↑Sat Jan 06, 2018 4:25 pmHappy to let DJz4 have first dibs as I'm not sure of what I need

Thanks - If yours work intermittently, it sounds like an electrical issue? When do they work and when don't they work?

DJz4 · Post by **DJz4** » Sat Jan 06, 2018 7:42 pm

Scaramanga wrote: ↑Sat Jan 06, 2018 4:42 pm
DJz4 wrote: ↑Fri Jan 05, 2018 11:34 pmpmd....if flimper doesn't want these.
Replied sir!

Thanks

Mark-Z4 · Post by **Mark-Z4** » Tue Jan 09, 2018 9:17 am

Still available?

Scaramanga · Post by **Scaramanga** » Tue Jan 09, 2018 9:19 am

Yes, no sale agreed yet.

JINGLE · Post by **JINGLE** » Tue Jan 09, 2018 10:09 pm

Depending on the car, you will also need the switch as he says, but also wiring looms which are a bit of a mission to make/source the correct looms for your model, unfortunately it’s not just a case of “plug and play”

Ducklakeview · Post by **Ducklakeview** » Thu Jan 11, 2018 9:49 pm

JINGLE wrote: ↑Tue Jan 09, 2018 10:09 pmDepending on the car, you will also need the switch as he says, but also wiring looms which are a bit of a mission to make/source the correct looms for your model, unfortunately it’s not just a case of “plug and play”

+1, having recently retrofitted these to my pre-facelift car, using a post-facelift as a donor, and having full access to any parts I needed, I still had to modify the driver's door loom.

Mike

Mark-Z4 · Post by **Mark-Z4** » Sat Jan 13, 2018 9:56 pm

What about the facelift/coupe, does that require the looms making or sourcing? Or are they already fitted?

Z4-forum.com

Z4-forum.com