No, it’s intended to be only a few mm thick. I’m currently in the process of smoothing our my garage floor in sections at a time, ahead of painting it.Nictrix wrote: ↑Tue Feb 06, 2018 10:58 pmIs there a minimum thickness that this needs to be put down to stop it breaking up?rally-chris wrote: ↑Tue Feb 06, 2018 10:47 pmYes - get yourself some self levelling screed. This is usually a relatively quick drying plasticised cement that will smooth out lumps and bumps and give you a much smoother and less dusty surface than raw concrete. You have to mix it with water as then spread it out with a trowel or straight edge and then it levels itself out.Nictrix wrote: ↑Tue Feb 06, 2018 10:42 pm Is there an easy way to make a concrete floor flat?
Our garage used to have a home made pit that I filled years ago but the surface is not very smooth.
Because of this I have never painted it or put flooring tiles down as the centre section where the pit was is not flat enough.
Chris
If it needed to be put down an inch thick it would create a bump going in and out of the garage and possibly give me a problem with the garage door.
Chris