E89 19" Opinion Time

Stretch · Post by **Stretch** » Sun Jun 09, 2019 6:11 pm

Smartbear wrote: ↑Wed May 15, 2019 5:48 pm 19” Veemann alloys here
9BA6E7C0-3BFA-42D6-9827-94098D2C6F9E.jpeg
Rob

I’m looking at the same Veeman alloys currently. Are you happy with them? They look great

mr wilks · Post by **mr wilks** » Sun Jun 09, 2019 6:26 pm

Stretch wrote: ↑Sun Jun 09, 2019 6:11 pm
Smartbear wrote: ↑Wed May 15, 2019 5:48 pm 19” Veemann alloys here
9BA6E7C0-3BFA-42D6-9827-94098D2C6F9E.jpeg
Rob
I’m looking at the same Veeman alloys currently. Are you happy with them? They look great

Rob has the FS25s , jmo but get the FS24s if you can

all Vees are identical quality but the 24s have a slight twist on the spoke

Stretch · Post by **Stretch** » Sun Jun 09, 2019 6:36 pm

They both look good. I never knew choosing new alloys would be so difficult. I’ve got the 296 on currently and they really suit the deep sea blue so I’m hoping the Veemanns will too

Stretch · Post by **Stretch** » Sun Jun 09, 2019 8:54 pm

mr wilks wrote: ↑Sun Jun 09, 2019 6:26 pm
Stretch wrote: ↑Sun Jun 09, 2019 6:11 pm
Smartbear wrote: ↑Wed May 15, 2019 5:48 pm 19” Veemann alloys here
9BA6E7C0-3BFA-42D6-9827-94098D2C6F9E.jpeg
Rob
I’m looking at the same Veeman alloys currently. Are you happy with them? They look great
Rob has the FS25s , jmo but get the FS24s if you can all Vees are identical quality but the 24s have a slight twist on the spoke

Are your centre caps fitted or adhesive?

BERNEV · Post by **BERNEV** » Sun Jun 16, 2019 7:24 pm

I like the FS24s too but they don't seem to be listed on the Veemann site. Are the discontinued? Is the finish any good?

Z4C_er · Post by **Z4C_er** » Tue Jun 18, 2019 8:35 am

Mr Wilks had these on his car at one time and I think they look the ducks guts. Any thoughts?
https://www.wheelbasealloys.com/alloy-w ... KYEALw_wcB

mr wilks · Post by **mr wilks** » Tue Jun 18, 2019 9:12 am

BERNEV wrote: ↑Sun Jun 16, 2019 7:24 pm I like the FS24s too but they don't seem to be listed on the Veemann site. Are the discontinued? Is the finish any good?

Finish & manufacture on them is very high quality FS24 still available here https://cmwheels.com/product/19-stagger ... 3-f10-f11/

BERNEV · Post by **BERNEV** » Tue Jun 18, 2019 1:33 pm

Thank you Mr Wilks. i take it that they need spacers as they aren't listed for the E89. Does this mean a "sliver" of alloy to go between the hub and the wheel. Does that then mean that there is a potential problem of wheel arch clearance on full lock or full suspension travel?

mr wilks · Post by **mr wilks** » Tue Jun 18, 2019 4:14 pm

BERNEV wrote: ↑Tue Jun 18, 2019 1:33 pm Thank you Mr Wilks. i take it that they need spacers as they aren't listed for the E89. Does this mean a "sliver" of alloy to go between the hub and the wheel. Does that then mean that there is a potential problem of wheel arch clearance on full lock or full suspension travel?

Those above would fit straight on E89 no spacers required

Z4-forum.com

Z4-forum.com