Page 1 of 1

TPMS - Holts TyreWeld

Posted: Thu Mar 14, 2019 7:37 pm
by ZedConvert
Hi all,

So I did search this forum, Google, and have asked Holts TyreWeld Support directly, but still my question is outstanding (although it must have been considered a ton of times).

I am switching from RFs; I have an E89 (2014), so the TPMS are in the valves.

If I use TyreWeld on the TPMS valves will it damage them irreparably? :fuelfire: (I know Holts say it will wash out from the tyre with warm water, but not sure about the valve).

If not, what other options are there?

Thank you

Darren

TPMS - Holts TyreWeld

Posted: Thu Mar 14, 2019 11:38 pm
by Tinker15
Slime https://www.amazon.co.uk/Slime-1800311- ... BV9JGK8AKA is supposed to be OK with TPMS.

TPMS - Holts TyreWeld

Posted: Thu Mar 14, 2019 11:55 pm
by ZedConvert
Tinker15 wrote:
Thu Mar 14, 2019 11:38 pm
Slime https://www.amazon.co.uk/Slime-1800311- ... BV9JGK8AKA is supposed to be OK with TPMS.
Yeah I think OK with TPMS means it's supported, still not convinced it won't damage the sensors.

I've emailed them. Thanks

TPMS - Holts TyreWeld

Posted: Fri Mar 15, 2019 12:26 am
by Angie4m
The M4s are not fitted with run flats and a compressor with slime/gunk/glue is provided in the boot so I’m assuming using said ‘mobility’ kit won’t damage the TPM sensors. Then again it maybe a potential money spinner for BMW.