Hey guys,
My Z4MC has the OEM CSL, and I’ve purchased some Bilstein B12 as an early christmas present. But I know the front alloys sit quite inboard, so what spacer is recommended to bring them out as far as possible without any rubbing/issues?
Pics would be great
Thanks!
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
OEM CSL + Bilstein B12 = what spacers?
-
- Member
- Posts: 170
- Joined: Fri Jun 21, 2013 8:23 am
- Location: Guildford
OEM CSL + Bilstein B12 = what spacers?
Z4MC Interlagos Blue
Instagram: z4mcuk
Instagram: z4mcuk
- DONDP
- Member
- Posts: 341
- Joined: Wed Feb 29, 2012 6:00 pm
OEM CSL + Bilstein B12 = what spacers?
I found that 12mm spacers rubbed so went down to 5mm spacers.
In order to to this you need to run hub extenders. you can get them from VAC motorsports. Or buy the set I no longer use. I have the extenders, bolts and TPI 5mm spacers.
In order to to this you need to run hub extenders. you can get them from VAC motorsports. Or buy the set I no longer use. I have the extenders, bolts and TPI 5mm spacers.