Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Hardwire a dash cam - question about pillars covers
-
- Newbie
- Posts: 5
- Joined: Wed Mar 12, 2014 12:35 pm
Hardwire a dash cam - question about pillars covers
Hello guys!
I am going to fix a dash cam on my Z4 and I would like to hardwire it.
Does anyone know hot to remove the black matt cover of front pillars and also the one around the windshield (where sun visors are)?
I am scared to ruin them doing something wrong.
Any help will be appreciated!
Thank you in advance!
I am going to fix a dash cam on my Z4 and I would like to hardwire it.
Does anyone know hot to remove the black matt cover of front pillars and also the one around the windshield (where sun visors are)?
I am scared to ruin them doing something wrong.
Any help will be appreciated!
Thank you in advance!
- Number5
- Lifer
- Posts: 6025
- Joined: Tue Sep 24, 2013 7:34 pm
- Location: Bristol M4/M5
Re: Hardwire a dash cam - question about pillars covers
Hi, Welcome to the forum,
If you are looking t mount it up by the drivers mirror, Have a look at my 'How-to' post here....
viewtopic.php?f=31&t=73905&p=1085994&hi ... m#p1085994
If you are looking t mount it up by the drivers mirror, Have a look at my 'How-to' post here....
viewtopic.php?f=31&t=73905&p=1085994&hi ... m#p1085994
Alpina Roadster #307
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
- PerryGunn
- Lifer
- Posts: 9785
- Joined: Mon Jun 25, 2012 6:16 pm
- Location: By the seaside...
Re: Hardwire a dash cam - question about pillars covers
I thought about linking to your how-to Alan, but the OP has posted in the E89 section so it might be different for themNumber5 wrote:Hi, Welcome to the forum,
If you are looking t mount it up by the drivers mirror, Have a look at my 'How-to' post here....
viewtopic.php?f=31&t=73905&p=1085994&hi ... m#p1085994
Alpina Roadster S #320
* Quaife ATB LSD * StrongStrut Braces * Turner RTAB Limiters * Gap-Tech RCH+ *
* Intravee & KCA-420i * Mini 0806 * Cheetah C550 * Stubby *
* Quaife ATB LSD * StrongStrut Braces * Turner RTAB Limiters * Gap-Tech RCH+ *
* Intravee & KCA-420i * Mini 0806 * Cheetah C550 * Stubby *
- Number5
- Lifer
- Posts: 6025
- Joined: Tue Sep 24, 2013 7:34 pm
- Location: Bristol M4/M5
Re: Hardwire a dash cam - question about pillars covers
Good SpotPerryGunn wrote:I thought about linking to your how-to Alan, but the OP has posted in the E89 section so it might be different for themNumber5 wrote:Hi, Welcome to the forum,
If you are looking t mount it up by the drivers mirror, Have a look at my 'How-to' post here....
viewtopic.php?f=31&t=73905&p=1085994&hi ... m#p1085994
In that case, it may be the same as my 2011 520d (F11) He'll just need the green&brown wire instead of the violet & white one, but everything else is the same procedure.
Alpina Roadster #307
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
-
- Lifer
- Posts: 4037
- Joined: Sat May 25, 2013 8:27 pm
- Location: Stourbridge
Re: Hardwire a dash cam - question about pillars covers
If you need to feed wires down the side pillars, like I did to take a feed from the dome light, just pull off the rubber door seal and there is enough gap to feed a wire without removing the black plastic trim.
-
- Newbie
- Posts: 5
- Joined: Wed Mar 12, 2014 12:35 pm
Re: Hardwire a dash cam - question about pillars covers
Hello guys....
Thank you for your reply: I need to remove the black plastic trim from pillars because I need to reach the fuse box. Plus I have a dash cam with 2 ch...so it means I need also to make the power wire to run from rear camera to front one.
Any suggestion about how to remove safely the black trims from pillar will be very much appreciated.
Thank you in advance!
Thank you for your reply: I need to remove the black plastic trim from pillars because I need to reach the fuse box. Plus I have a dash cam with 2 ch...so it means I need also to make the power wire to run from rear camera to front one.
Any suggestion about how to remove safely the black trims from pillar will be very much appreciated.
Thank you in advance!
-
- Member
- Posts: 66
- Joined: Fri May 15, 2015 10:43 am
Re: Hardwire a dash cam - question about pillars covers
Am looking to do this shortly with my 2CH Blackvue DR-650. Out of interest, where are you planning to place the rear camera on you Z4?lukas_4942 wrote:Hello guys....
Thank you for your reply: I need to remove the black plastic trim from pillars because I need to reach the fuse box. Plus I have a dash cam with 2 ch...so it means I need also to make the power wire to run from rear camera to front one.
Any suggestion about how to remove safely the black trims from pillar will be very much appreciated.
Thank you in advance!
- jimbo1958
- Lifer
- Posts: 6471
- Joined: Wed Jun 09, 2010 10:49 pm
- Location: Romancing Your Mum
Re: Hardwire a dash cam - question about pillars covers
Another job I would like to do on mine. Keen to see it on another E89 first as I can't abide wires on show.
Z4 e85 3.0 - GONE
Z4 e89 35i - GONE
Jaguar F Type V6s Roadster
Abarth 695 Rivale
Z4 e89 35i - GONE
Jaguar F Type V6s Roadster
Abarth 695 Rivale
-
- Newbie
- Posts: 20
- Joined: Wed Dec 26, 2018 12:50 pm
Hardwire a dash cam - question about pillars covers
Number 5, I have all the components and am currently looking at the wire looms, unable to identify the green and brown wire. (BMW Z4 E89). I’ve been using your other guide and I believe as soon as I locate a wire to piggy back off using the connector I’ll be all good. Can you help at all / take a picture? Thanks a lot!
-
- Newbie
- Posts: 20
- Joined: Wed Dec 26, 2018 12:50 pm
Hardwire a dash cam - question about pillars covers
Number 5, these are the two clusters of wires. Any idea?
- Attachments
-
- 7CDDA9FB-6046-44BB-896E-39A7D3CCE4B1.jpeg (303.7 KiB) Viewed 4135 times
-
- 9523466C-8C08-4B83-B361-39F092691D65.jpeg (258.04 KiB) Viewed 4135 times