Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Headlight washers
-
- Newbie
- Posts: 29
- Joined: Sun Sep 23, 2018 7:04 am
- Location: Cambridge
Headlight washers
Whenever my headlight washers operate, one of the ‘covers’ doesn’t retract correctly and the bottom of it always sits proud of the bumper. How can I get the washers to operate but not retract so that I can see what the problem is? It has got to the stage where I can’t even push it back down, it just pushes itself back up. Failing that, how do I get the cover off?
E89 2009 30i Auto. Silver with red trim.
Other toy - 2007 E93 335i with just about every option going. I love being topless.......
Other toy - 2007 E93 335i with just about every option going. I love being topless.......
-
OnlineNictrix
- Lifer
- Posts: 5448
- Joined: Mon Aug 18, 2014 9:59 pm
- Location: Paisley
Headlight washers
If its raised slightly just grab the cover and ease it out fully.
If not get someone to activate the washers and grab it when its extended.
It will probably either need stripped and cleaned or replaced.
The units are around £70 each.
Not sure on access but they may be able to be removed via the bumper grill underneath each washer.
If not get someone to activate the washers and grab it when its extended.
It will probably either need stripped and cleaned or replaced.
The units are around £70 each.
Not sure on access but they may be able to be removed via the bumper grill underneath each washer.
E89 2014 35i M Sport Black with Black leather
-
- Newbie
- Posts: 9
- Joined: Fri Jan 25, 2019 5:00 am
- Location: Denmark
- Contact:
Headlight washers
That is the correct wiring.
The headlight plug has 3 connectors and 5 wires. Two yellow goes to one connector, two black goes to one connector and one green to the last connector.
The headlight plug has 3 connectors and 5 wires. Two yellow goes to one connector, two black goes to one connector and one green to the last connector.