Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
SOLD Mid-rise 2.7t vehicle lift
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
Mid-rise 2.7t vehicle lift
As I no longer need this, and it's in the way, I am selling my vehicle lift. Purchased from BH Lifts approx 14 months ago, it still had the balance of their 3 year warranty.
Lifts 2,700kg to just over 1200mm high in approx 15 seconds. This is single phase and works from a 13a plug. Unlike a lot of them out there, it DOESN'T need a compressed air supply to release the safety locks.
I looked at loads before buying from BH as they have a really good reputation for testing items before selling them, and for aftersale service, which I've yet to need.
Comes with 4 sets of different height lifting pads and also extension rods for lifting vans and 4x4's etc. I have had all sorts on it and access to the underside is good enough to take the gearbox out full exhaust etc out of a Zed. It is low enough for SE cars to drive straight into or park over, on mine, I needed a scaffolding plank either side to clear it. Easily movable with the supplied castor.
I was going to recess it into my gateways for at home so it says completely level with the floor, but never got around to it.
They are just under £1300 plus delivery, which is £200 as it weighs over 500kg..
It fits into my van perfectly (2010 citroen dispatch) so I am probably sort delivery within a reasonable distance.
Looking for £900 from a forum member..
I'll take some actual pics when I get a second, but it's under a car at the moment, it's in perfect condition with just normal usage marks.
Here is a video of the actuall lift from the seller I got mine from..
Mike
Lifts 2,700kg to just over 1200mm high in approx 15 seconds. This is single phase and works from a 13a plug. Unlike a lot of them out there, it DOESN'T need a compressed air supply to release the safety locks.
I looked at loads before buying from BH as they have a really good reputation for testing items before selling them, and for aftersale service, which I've yet to need.
Comes with 4 sets of different height lifting pads and also extension rods for lifting vans and 4x4's etc. I have had all sorts on it and access to the underside is good enough to take the gearbox out full exhaust etc out of a Zed. It is low enough for SE cars to drive straight into or park over, on mine, I needed a scaffolding plank either side to clear it. Easily movable with the supplied castor.
I was going to recess it into my gateways for at home so it says completely level with the floor, but never got around to it.
They are just under £1300 plus delivery, which is £200 as it weighs over 500kg..
It fits into my van perfectly (2010 citroen dispatch) so I am probably sort delivery within a reasonable distance.
Looking for £900 from a forum member..
I'll take some actual pics when I get a second, but it's under a car at the moment, it's in perfect condition with just normal usage marks.
Here is a video of the actuall lift from the seller I got mine from..
Mike
Last edited by Ducklakeview on Thu Jun 07, 2018 9:06 pm, edited 1 time in total.
- bluespit
- Senior Member
- Posts: 1314
- Joined: Fri Dec 23, 2011 1:01 am
- Location: Near Chester
Mid-rise 2.7t vehicle lift
I have something very similar, excellent bit of kit and a good price too
GLWTS
GLWTS
now I'm about to have more time I've suddenly got less toys to play with!
- NickDE
- Senior Member
- Posts: 1170
- Joined: Sat Oct 01, 2016 12:21 pm
- Location: Newcastle upon Tyne
Mid-rise 2.7t vehicle lift
I'm very tempted, but have nowhere to install such a thing. Plus right now the funds are going into ABS pump refurb plus water pump replacement
Darkness gone, go Darknes2, go Frozen, go Tronic
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
Mid-rise 2.7t vehicle lift
I could have done both of those jobs for you, when you called to collect the lift
At least you know your 330 fits on it...
Mike
- NickDE
- Senior Member
- Posts: 1170
- Joined: Sat Oct 01, 2016 12:21 pm
- Location: Newcastle upon Tyne
Mid-rise 2.7t vehicle lift
I would have brought it to you if you lived somewhere a bit more sensibleDucklakeview wrote: ↑Sat Jun 02, 2018 11:34 pmI could have done both of those jobs for you, when you called to collect the lift
At least you know your 330 fits on it...
Mike
To help your sale, proof it does indeed lift a 330i:
- Attachments
-
- IMG_3455.JPG (171.16 KiB) Viewed 1656 times
Darkness gone, go Darknes2, go Frozen, go Tronic
-
- Lifer
- Posts: 7020
- Joined: Fri Jun 29, 2012 7:53 am
- Location: High Peak,Derbyshire.
Mid-rise 2.7t vehicle lift
Great bit of kit these..
Mike,put it on detailing world it will fly out.....
Mike,put it on detailing world it will fly out.....
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
- Beedub
- Lifer
- Posts: 11011
- Joined: Wed Sep 10, 2008 2:25 pm
- Location: Sutton Coldfield
Mid-rise 2.7t vehicle lift
ive just spoke to BH lifts, deliver for a brand new one to Birmingham is 75 quid....
will you except 850 delivered would be great in the new unit and perfect size as its only a small place??? unfortunately i have no way of collecting.
if so, no messing... ill take it.
will you except 850 delivered would be great in the new unit and perfect size as its only a small place??? unfortunately i have no way of collecting.
if so, no messing... ill take it.
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
Mid-rise 2.7t vehicle lift
Pm'd..Beedub wrote: ↑Thu Jun 07, 2018 8:49 pm ive just spoke to BH lifts, deliver for a brand new one to Birmingham is 75 quid....
will you except 850 delivered would be great in the new unit and perfect size as its only a small place??? unfortunately i have no way of collecting.
if so, no messing... ill take it.
Mike
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
Mid-rise 2.7t vehicle lift
Now sold
Mike
Mike
- Beedub
- Lifer
- Posts: 11011
- Joined: Wed Sep 10, 2008 2:25 pm
- Location: Sutton Coldfield
Mid-rise 2.7t vehicle lift
CHEERS mike!!!
thankyou so much!!
thankyou so much!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |