FOR SALE FS - BMW Z4M Coupe track car

Buying and selling Z4's (VEHICLE SALES ONLY) (private sales only, no traders)
Post Reply
dannyg_m3
Member
Member
Posts: 257
Joined: Thu Dec 13, 2012 7:10 pm

FS - BMW Z4M Coupe track car

Post by dannyg_m3 » Mon Apr 15, 2019 2:56 pm

Hi All,

I sold this car a couple of years ago having built it for myself back in 2016. The car is awesome, and has now covered 72k miles. The owner is selling it due to lack of use. Below if the original advert. The price remains the same at £24,995

Many of you will know the build process that I went through, but essentially I wanted to create a M Coupe CSL that BMW would be proud of.

The car itself when I bought it was a 55,000 miles car with full BMW and specialist service history, had never been repainted (so 1st paint), and was a very nicely spec'd car for long trips to the ring; Sat Nav, top option stereo with the subwoofers, cup holders etc etc.
The previous two owners were both forum members and the later one is my best friend who owned the car for several years before I bought it off him to start this project.

When I bought the car I was fortunate enough to have the budget ready and waiting to get all of the parts that I wanted for it. It also describes the current spec;

KW Clubsport 2 way - £2,400
XYZ BBK with two piece discs all round fully refurbished - £1,000
JC Racing 4 plate LSD upgrade - £500
New performance friction 11 pads - £550
Vibra Technics engine and gearbox mounts - £410
Apex ARC 8 wheels - £1200
Rogue engineering rear top mounts - £100
Schroth harnesses - £300
H&R adjustable ARB's - £350
powerflex black rear trailing arm bushes - £100
Cobra Suzuka pro seats - £800
MSTACHE 2 front splitter - £250
M3 GTS style rear spoiler in carbon - £350
BCS powervalve rear back boxes - £700
Grouppe M induction kit - £400
Adjustable rear camber arms - £100
steering wheel and gear gaitor recovered in alcantara and M stitching - £350
I also had the bottom end rebuilt at the same time (new crank bearings and oil pump rebuild) - £1000
GTS styled carbon rear sppolier - £400

As you can see, the list is long and expensive! £11,260 in parts alone (some labour on the bottom end rebuild). This does not include the high cost of several trip to get the geometry done to my liking and the time spent fitting all of the parts etc.
The car also comes with it's original Z4M wheels with wet tyres on.
The Apex wheels have nearly new Toyo R888's.

You will also notice that the calipers have been refurbished in Nissan Gold and the wheels have been done in BMW Sepang Bronze.

Here are some photos

http://s1115.photobucket.com/user/danny ... 4M%20Coupe


Thanks,
Dan

Post Reply