Headlight renovation WITHOUT buying "a kit" WITH PICS

Submit How-To's here and the moderators will allocate them to the appropriate section
Post Reply
User avatar
Ducklakeview
Lifer
Lifer
Posts: 6352
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by Ducklakeview » Fri Aug 04, 2017 11:13 am

Ok,

Not sure if it's been posted before, I know people have used the "kits" available on fleabay and the like, but thought I'd do mine without one..

Bagged myself a set of facelift xenons for the bargain of £200 delivered.

Upon arrival, noticed the lenses were showing the usual age related clouding, so decided to remove this before fitting them. You can do this in situ, just make sure you mask the areas around the headlight with TWO layers of wide masking tape, to prevent paint scuffs.

This is how they looked.. Photo doesn't highlight just how bad they were.
20170802_140204.jpg
20170802_140204.jpg (168.63 KiB) Viewed 1575 times

So, after washing them, I proceeded to hand sand with plenty of water, and 400 grit wet & dry. At this point, if you haven't done it before, you'll probably be thinking "oh hell, what I have I done" but don't worry.. The aim is to get the surface smooth all over and remove the hazing/cloudiness. Sand in a circular direction, NOT straight lines, or it'll be harder to remove the sanding marks at the next stage. By now, they should be looking like this;
20170802_140209.jpg
20170802_140209.jpg (193.79 KiB) Viewed 1575 times

And after a wipe down, like this;
20170802_141246.jpg
20170802_141246.jpg (157.39 KiB) Viewed 1575 times
If there are still clear or excessively cloudy sections at the above stage, continue wet sanding with the 400 until the whole surface is an even dull matt like the above pic.

After that, I used a 1500 grit disc in my DA on medium speed, again wet sanded, until it looked like this;
20170802_142422.jpg
20170802_142422.jpg (176.64 KiB) Viewed 1575 times

Washed off and swapped to a 3000 grit disc, again at medium speed and wet, until after wiping, the lens looked like this;
20170802_143328.jpg
20170802_143328.jpg (223.85 KiB) Viewed 1575 times

Finally, I switched to a pad and did 3 passes each with meg's 105 cutting compound, followed by 205 polish, before finally sealing with a couple of coats of Collinite 426s, which left the headlamps looking like this;
20170802_145325.jpg
20170802_145325.jpg (233.32 KiB) Viewed 1575 times

Total time, around an hour to do both and a few pence in wet&dry/sanding discs....

Very rewarding!!

Mike

User avatar
jamie_z4
Lifer
Lifer
Posts: 3609
Joined: Fri Dec 31, 2010 9:38 pm

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by jamie_z4 » Fri Aug 04, 2017 11:27 am

wow they look brand new!
Zedless :(

bz4kev
Senior Member
Senior Member
Posts: 1066
Joined: Wed Jan 25, 2017 4:59 pm
Location: wirral

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by bz4kev » Fri Aug 04, 2017 12:50 pm

Very good job mike look great the finish looks spot on :thumbsup:
2004 z4 30i auto Toledo blue stubby areo front back sideskirts and rear spoiler mfsw DLV exhaust mod vanos overhaul 108s refurbed ram air scoop E46 M3 seats clear rear lights m sport black grills

User avatar
maxman
Senior Member
Senior Member
Posts: 1892
Joined: Mon Jun 07, 2010 11:34 pm
Location: Wrexham

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by maxman » Fri Aug 04, 2017 4:05 pm

Should add 20mph to your top speed when it gets dark . :D
2005 3.0I Toledo Blue ,Aeroskirts,Gaptech,Z4M wheels Goodyear F1 ,ZHP,M steering wheel,M front bumper.M Seats
Image

User avatar
Chris_D
Lifer
Lifer
Posts: 3992
Joined: Thu Apr 21, 2016 11:41 pm
Location: Mostly Holland. Sometimes UK.

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by Chris_D » Fri Aug 04, 2017 4:10 pm

tip top mike!
:thumbsup:
Image Image Image
Now: E85 3.0iSE roadster (03) 'Bruiser'. E93 320d M-Sport Cabrio (11) 'Bob'.
Past: E36 323i (96) 'Benny' 18yrs/260k RIP. E46 M3coupe (03) 'Pongo' RIP. Ariel Atom 2(shared).

User avatar
flimper
Lifer
Lifer
Posts: 4112
Joined: Wed Jan 21, 2009 11:47 pm
Location: Camberley, Surrey

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by flimper » Fri Aug 04, 2017 4:16 pm

Looks good, hoping to do mine soon
Image

Piano black & black extended leather. Power mirrors, tinted glass, PDC, Prof hi-fi, CD, retro-fit cruise

User avatar
Ducklakeview
Lifer
Lifer
Posts: 6352
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by Ducklakeview » Fri Aug 04, 2017 4:19 pm

flimper wrote:
Fri Aug 04, 2017 4:16 pm
Looks good, hoping to do mine soon
Did your car even come with headlights? Weren't they optional?? 😁😁

Mike

User avatar
flimper
Lifer
Lifer
Posts: 4112
Joined: Wed Jan 21, 2009 11:47 pm
Location: Camberley, Surrey

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by flimper » Fri Aug 04, 2017 11:29 pm

Don't you start!
Image

Piano black & black extended leather. Power mirrors, tinted glass, PDC, Prof hi-fi, CD, retro-fit cruise

User avatar
Swiftly
Lifer
Lifer
Posts: 8281
Joined: Wed Dec 28, 2011 10:43 pm
Location: Edinburgh

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by Swiftly » Sat Aug 05, 2017 8:21 am

That's a impresive result, well done :thumbsup:
Replacement, M240i auto coupe with lots of toys :D :driving:

Gone but not forgotten, my much loved 2007, 3.0si Sports, Silver Grey, Dream Red Leather 224 M Sport Alloys, Aero Skirts

User avatar
Marlon
Moderator
Moderator
Posts: 9884
Joined: Mon Jan 05, 2015 11:13 am
Location: Lancs.
Contact:

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by Marlon » Sat Aug 05, 2017 8:44 am

Neat job Mike :thumbsup:
Image
3.0si 2008 | Quantum Remap | M Sports Seats | Cruise Control | M wheel
style 224 alloys | DLV back box | CDV delete | Stainless steel B06 gear knob

User avatar
cj10jeeper
Lifer
Lifer
Posts: 17812
Joined: Fri Jun 22, 2007 11:50 am
Location: Lichfield, England

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by cj10jeeper » Sat Aug 05, 2017 9:49 am

Looks great and pleasing to do

Well established method of restoring and did similar on mine. Only word of caution for others that copy is when using any machine polisher to keep it slow and moving. I've seen the result on a VX when the plastic gets too warm and smears and it's not pretty. New lights then required...
Jaguar F-Type 3.0 Supercharged V6 S, Stratus Grey, LSD, Active Exhaust, CF wheels, Performance brakes, Sports seats and mods ongoing
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills

User avatar
kammy1975
Member
Member
Posts: 250
Joined: Tue Aug 12, 2014 4:55 pm
Location: West Yorkshire

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by kammy1975 » Sat Aug 05, 2017 12:23 pm

Great work Mike, and nice pics showing each stage clearly.

I went for the 3M kit and learnt quite quickly that using a cordless drill on the slowest setting was still too aggressive, and left some "burns" in the plastic. Ditched the drill and used good old hand power. Got a smooth finish, but it was a little rushed, so will revisit at some point, as it does make the front end stand out when the headlight lenses are gleaming!
56 Reg Titan Silver Z4 Coupe 3.0si SE Auto
-Stubby Aerial
-AUX IN & Cruise Control
-LED Bling
-Wrapped da roof
-Folding Fancy key
-Shiny black kidneys
-Lip Wrap
-Lowered on Eibachs
-Running smaller 18" s

User avatar
cj10jeeper
Lifer
Lifer
Posts: 17812
Joined: Fri Jun 22, 2007 11:50 am
Location: Lichfield, England

Headlight renovation WITHOUT buying "a kit" WITH PICS

Post by cj10jeeper » Sat Aug 05, 2017 2:08 pm

That's pretty much the issue with drill or standard rotary polishers. They concentrate all the work effort on a single spot. Excellent for pros who do it all day, but not rest of us. Random orbital with care or hand
Jaguar F-Type 3.0 Supercharged V6 S, Stratus Grey, LSD, Active Exhaust, CF wheels, Performance brakes, Sports seats and mods ongoing
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills

Post Reply