Z4-forum.com

Maybe a stupid question, but if you don't ask, you don't know right?

Did a search, but could only find info on fitting a facelift rear, or an //M front bumper to a pre-facelift.


so here's my question: Do I need any special parts / different mounting brakets / etc to fit a rear //M bumper to my pre-facelift 3.0i?

Excluding the lights, light cover thingies and the bumper itself, do I need ANYTHING else?

I had to fabricate a way of attaching the lower center part of the bumper to the stock mounts... Used a bit of plastic to secure it to two points otherwise the bumper flexes too much.


Sent from my iPhone 5s using Tapatalk

I cut the bottom of my old bumper off and attached it to the M bumper.


Sent from my iPhone 5 using Tapatalk pro

You will require item 6 as is different at the ends to the prefacelift
http://www.realoem.com/bmw/showparts.do ... g=51&fg=17


Sent from my iPhone 5 using Tapatalk pro