Page 1 of 3
setting clock
Posted: Mon Nov 05, 2007 6:26 am
by zforce
I know this sounds stupid but my wife and I purchased a 03 Z-4 about 2 months ago and now with the time change I can't figure out how to change time and seems nothing in owners packet.She has the factory in dash CD.Please help and thanks.
setting clock
Posted: Mon Nov 05, 2007 7:13 am
by Citation 650
Page 48 of the 2003 manual:
To adjust
Ignition key in position 1 or higher:
Hours
1. Keep button 2 pressed for several seconds
until the hours are displayed and
the colon flashes
2. Press button 1 repeatedly until the
required hour is set
Minutes
3. Press button 2 to switch to the minutes
display
4. Press button 1 repeatedly until the
required minutes are set
5. Press button 2 to confirm the settings.
The set time of day is transferred to the car
radio display or appears in the instrument
cluster display.
Display mode
In ignition key position 0:
Press button 1.
The time of day is displayed for several
seconds.
Re: setting clock
Posted: Mon Nov 05, 2007 8:47 am
by zforce
Thanks for your help.I new it had to be simple.
Re: setting clock
Posted: Mon Nov 05, 2007 10:34 am
by ovrkll
Thanks for the reminder to those of us that forgot, also!
Cheers!
Re: setting clock
Posted: Mon Nov 05, 2007 2:00 pm
by PaulN
LoL
Just done mine too, was playing with it on the way to work but thought it was best to watch the road.....
Cheers
PaulN
Re: setting clock
Posted: Mon Nov 05, 2007 5:38 pm
by rosierobins
yah, i started fiddling with those 2 buttons as I was driving and it flashed "RESET" which scared the heck outta me. I just stopped and restarted the car and it seemed to forget the button I pushed.....I think.
I will do it your way now.
Rosie
Re: setting clock
Posted: Tue Nov 06, 2007 3:55 pm
by Aebous
Yeah I hadn't gotten around to changing mine yet. Was fixing to take a peek at the bible myself.
Re: setting clock
Posted: Tue Nov 06, 2007 4:06 pm
by 561design
LOL make this a sticky. I forgot how to do mine as well.
Re: setting clock
Posted: Tue Nov 06, 2007 4:36 pm
by sp3ctre
Re: setting clock
Posted: Wed Nov 07, 2007 4:36 pm
by ovrkll
Re: setting clock
Posted: Mon Mar 30, 2009 5:59 pm
by IK.
I've tried this, and it hasn't worked. Tried it in positions 0, 1, 2, and 3. I press button 2 for ages, and nothing happens.
Re: setting clock
Posted: Mon Mar 30, 2009 6:08 pm
by Smokin
should work, mine's an 07 and it works as stated.
Button 2 is your oil check button. Turn ignition switch on but don't start the car. Press 2, hours will start to flash. etc, etc.
Re: setting clock
Posted: Mon Mar 30, 2009 6:09 pm
by IK.
Yep, that's correct, it's the oil one; but still doesn't work. Not sure why!
Re: setting clock
Posted: Mon Mar 30, 2009 7:19 pm
by jamesdean
Make sure it's displaying the clock before you do it?
Re: setting clock
Posted: Mon Mar 30, 2009 7:28 pm
by RichardG
I was going to point out that in mine you have to have the time on the radio aswell to change it, but was beaten to it.
on a slightly different note does anyone know if you can get the time to display if you fit an aftermarket HU.
