Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Retrofit kit passenger airbag shutoff.
-
- Newbie
- Posts: 1
- Joined: Sat May 11, 2013 11:25 am
Retrofit kit passenger airbag shutoff.
I've been trying to get a Retrofit kit passenger airbag shutoff, for my 2004, Z4, but unfortunately BMW have stopped making this part. The old part number was -61310411229. Does anyone have any ideas to where I may get one. I have a 3 year old daughter and I need to be able to shut off the passenger airbag for her to be able to travel in the car. I was thinking of trying to get a second hand passenger airbag shutoff system from a breakers yard and get it fitted, but not sure this is feasible. All suggestions would be greatly appreciated.
- Nondizzyblonde
- Senior Member
- Posts: 1755
- Joined: Fri May 03, 2013 5:23 pm
- Location: Leicestershire
Re: Retrofit kit passenger airbag shutoff.
Same here - so I would be very interested in suggestions, although I am currently doing the seat back as far as possible thing, and I think having a proper child seat rather than just a booster helps.
Ex MR2 roadster owner gone over to the dark side - Ex black pre-facelift 2.0i se with red leather
- bcworkz
- Senior Member
- Posts: 1740
- Joined: Wed May 04, 2011 10:56 pm
- Location: ǝɹǝɥ ƃuoɹʍ s,sƃuıɥʇǝɯos
Re: Retrofit kit passenger airbag shutoff.
I believe obtaining a switch from the breakers is a feasible option. I'm not totally sure if the wiring is available or not in all vehicles, but the proper pins on the control unit are certainly available. Posts from other members questioning unconnected wires behind the air vent make me think wiring is in place. It should be feasible to construct the needed wiring if it is not already in place. To be clear, I do not know for sure if this will work, I have no knowledge of a successful retrofit. I only believe it to be possible in theory from my investigations with the BMW Wiring Diagram System (WDS).
Since my car came with this option from the factory, I'm not sure if the indicator light on the centre console is standard on all vehicles or not, as it also indicates seat mat status. If not in place, this part should be obtained as well. The same thoughts with wiring applies to this as well. It's probably feasible to have a functioning disable switch without this, but I think it's important to have visual confirmation that the airbag is indeed disabled.
Even though this only involves standard automotive wiring, since it is directly related to the airbag system, this sort of work should only be undertaken by someone well experienced in automotive wiring and occupancy protection systems work.
Since my car came with this option from the factory, I'm not sure if the indicator light on the centre console is standard on all vehicles or not, as it also indicates seat mat status. If not in place, this part should be obtained as well. The same thoughts with wiring applies to this as well. It's probably feasible to have a functioning disable switch without this, but I think it's important to have visual confirmation that the airbag is indeed disabled.
Even though this only involves standard automotive wiring, since it is directly related to the airbag system, this sort of work should only be undertaken by someone well experienced in automotive wiring and occupancy protection systems work.
"The cause of most problems are solutions" (06 3.0si, sport pkg)
- Terryvision
- Lifer
- Posts: 3490
- Joined: Mon Feb 18, 2013 10:35 pm
- Z4MO
- Member
- Posts: 830
- Joined: Mon Sep 02, 2013 1:22 pm
- Location: Wakefield, West Yorkshire
Re: Retrofit kit passenger airbag shutoff.
Shut off kit is discontinued.
Order parts by their individual part no.s and you will be able to get them all except for the instructions and the sticker.
61 12 0 411 235 wiring
61 31 6 954 788 airbag off light
61 31 6 974 643 key swith for airbag shut off
all 3 should be under £100 and will be 7 to 10 days according to my dealer but may be sooner.
i have booked my car in with a local independent BMW specialist who will fit for me .
Hope this helps
Order parts by their individual part no.s and you will be able to get them all except for the instructions and the sticker.
61 12 0 411 235 wiring
61 31 6 954 788 airbag off light
61 31 6 974 643 key swith for airbag shut off
all 3 should be under £100 and will be 7 to 10 days according to my dealer but may be sooner.
i have booked my car in with a local independent BMW specialist who will fit for me .
Hope this helps
2006 Black / Black Z4M Roadster
- Z4MO
- Member
- Posts: 830
- Joined: Mon Sep 02, 2013 1:22 pm
- Location: Wakefield, West Yorkshire
Re: Retrofit kit passenger airbag shutoff.
Thanks to another member there is a link below that will open a pdf for fitting the passenger airbag shut off system
www.gavandkel.co.uk/PDFs/6217EN.pdf
www.gavandkel.co.uk/PDFs/6217EN.pdf
2006 Black / Black Z4M Roadster
- McKoval
- Member
- Posts: 479
- Joined: Thu Mar 31, 2011 10:58 am
- Location: Krakow
Re: Retrofit kit passenger airbag shutoff.
Great finding - I was told that there's no way to retrofit it on new parts.
They say in the PDF that the wiring should be already there - is it or is it not present in post-facelift cars?
They say in the PDF that the wiring should be already there - is it or is it not present in post-facelift cars?
- Z4MO
- Member
- Posts: 830
- Joined: Mon Sep 02, 2013 1:22 pm
- Location: Wakefield, West Yorkshire
Re: Retrofit kit passenger airbag shutoff.
My car is in with the technician and i have supplied him with the 3 parts - if you buy the 3 parts listed above that will be enough....... the 'airbag off ' warning light, the key turn switch that fits in the end of the dash and the wiring , part no 61 12 0 411 235
You will also need the fitter to drill a hole in the centre console for the airbag light to fit into.
That's it, I have just collected my parts from the dealer this morning and will drop them off on Monday for fitting. So they definitely are available
You will also need the fitter to drill a hole in the centre console for the airbag light to fit into.
That's it, I have just collected my parts from the dealer this morning and will drop them off on Monday for fitting. So they definitely are available
2006 Black / Black Z4M Roadster
- ranski
- Lifer
- Posts: 6325
- Joined: Tue Jun 29, 2010 2:20 pm
- Location: Sutton Coldfield
Re: Retrofit kit passenger airbag shutoff.
reboot***
Z4MO | Did you get this fitted successfully?
Z4MO | Did you get this fitted successfully?
Z4 3.0 / Mods done... too many to mention
- Z4MO
- Member
- Posts: 830
- Joined: Mon Sep 02, 2013 1:22 pm
- Location: Wakefield, West Yorkshire
Re: Retrofit kit passenger airbag shutoff.
Yes I did get it fitted successfully by my Indy with no issues
2006 Black / Black Z4M Roadster
- ranski
- Lifer
- Posts: 6325
- Joined: Tue Jun 29, 2010 2:20 pm
- Location: Sutton Coldfield
Re: Retrofit kit passenger airbag shutoff.
awesome, thanks for feeding back
Ill order the parts you listed, thanks
Ill order the parts you listed, thanks
Z4 3.0 / Mods done... too many to mention
- Z4MO
- Member
- Posts: 830
- Joined: Mon Sep 02, 2013 1:22 pm
- Location: Wakefield, West Yorkshire
Re: Retrofit kit passenger airbag shutoff.
Best of luck mate and should be a very straight forward mod
2006 Black / Black Z4M Roadster
-
- Newbie
- Posts: 9
- Joined: Sat Jan 06, 2018 2:48 pm
Retrofit kit passenger airbag shutoff.
Kicking this post back into life.
I am going to get the parts for this retrofit off a BMW z4 that is in a breakers yard.
Might try and do a very quick walk through once I have the parts in my hands.
I am going to get the parts for this retrofit off a BMW z4 that is in a breakers yard.
Might try and do a very quick walk through once I have the parts in my hands.
BMW Z4 3.0i <2004>
-
- Member
- Posts: 696
- Joined: Wed Jul 26, 2017 12:32 pm
- Location: Newbury, Berks UK
Retrofit kit passenger airbag shutoff.
Remember that if you buy a used airbag switch you’ll need the matching key too. Only on more recent BMWs can you turn the airbag switch without a correctly coded key.
Chris
08 Z4 3.0si Sport Coupe in Montego Blue
-
- Newbie
- Posts: 9
- Joined: Sat Jan 06, 2018 2:48 pm
Retrofit kit passenger airbag shutoff.
Mmm, this does pose a problem. As the donor car does not have keys.
Correct me if I am wrong. But the Unit that controls the airbag. The safety control module or whatever it is called, is already in place and the switch unit plugs into that. Is the switch unit somehow smart, reading the key?
the donor car is a 2.5 Z4 2004 going into a 3.0 Z4 2004
I was going to replace the barrel with a barrel matched to my key or any key for that matter.
Any extra info would be super helpful!
Correct me if I am wrong. But the Unit that controls the airbag. The safety control module or whatever it is called, is already in place and the switch unit plugs into that. Is the switch unit somehow smart, reading the key?
the donor car is a 2.5 Z4 2004 going into a 3.0 Z4 2004
I was going to replace the barrel with a barrel matched to my key or any key for that matter.
Any extra info would be super helpful!
BMW Z4 3.0i <2004>