Handbrake off, Removed calipers, removed retaining screw on disc but the disk will not come off. Guessing the shoes are holding the disc on as I can wiggle the disc from side to side but i just can't get it off.
Do i have to adjust the handbrake or is there anything I am missing ?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
2007 3.0 Si rear brake discs will not release.
-
- Member
- Posts: 100
- Joined: Mon Aug 26, 2013 2:35 pm
- Location: Aberdeenshire
- dhobbs
- Senior Member
- Posts: 1621
- Joined: Mon Jul 16, 2012 5:33 pm
2007 3.0 Si rear brake discs will not release.
If you look through one of the bolt holes you will see the brake shoe adjuster. You'll need to rotate it with a flat head screwdriver.
This is a good guide that I've used before
https://www.pelicanparts.com/techarticl ... usting.htm
This is mine but slightly dismantled.This is a good guide that I've used before
https://www.pelicanparts.com/techarticl ... usting.htm
3.0si roadster. Requisite stubby. Sound gen mod. LED numberplate lights. LED boot strip. Interior lights LED too. ZHP gearknob. Daily drive
Motor in boot. Bilstein B8 dampers. New radio, much better sounds
Motor in boot. Bilstein B8 dampers. New radio, much better sounds
-
- Member
- Posts: 100
- Joined: Mon Aug 26, 2013 2:35 pm
- Location: Aberdeenshire
2007 3.0 Si rear brake discs will not release.
Cheers, will have a look tomorrow