I have an older Z4 2.5 which has been off the road for quite a while & the hood will not retract (latches work) I know there was a chap who specialised in relocating the motors when they get damaged (Bowser 134?) Anyone know if he is still doing them + contact details if he is? Failing that is there anyone else who does the same job?
I’m Hampshire based.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Z4 Hood Motor
-
Ole gits rule
- Lifer
- Posts: 4559
- Joined: Sat Oct 24, 2020 5:49 pm
- Location: Pont-y-Pwll
Z4 Hood Motor
You could try Number 5 - Alan lives in Bristol so a little closer than Ross.
Three posts and you can PM him
Three posts and you can PM him
M4 Vert in Yas Marina Blue
2011 23i M Sport Highline in Alpine White with Smart Top installed - Gone but not forgotten.
2011 23i M Sport Highline in Alpine White with Smart Top installed - Gone but not forgotten.
-
Number5
- Lifer
- Posts: 6026
- Joined: Tue Sep 24, 2013 7:34 pm
- Location: Bristol M4/M5
Z4 Hood Motor
Yes Im closer (to Gloucester) and can do it, but if you’re Hampshire based (despite your Username) then Bowser is your man
Alpina Roadster #307
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
Porsche Boxster GTS
Previous Zs
Stratus E86
G29 30i
1x Imola Z4MR
Alpina #019
10x E85 Se/Si Roadsters
2x E89's
Roof Motor Relocations (Bristol)
-
AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
Z4 Hood Motor
Bowser134 now runs RBM Hampshire a BMW specialist in Hook so I imagine pretty close to you, google for his contact detailsGloucester wrote: ↑Fri Jul 30, 2021 9:08 pm I have an older Z4 2.5 which has been off the road for quite a while & the hood will not retract (latches work) I know there was a chap who specialised in relocating the motors when they get damaged (Bowser 134?) Anyone know if he is still doing them + contact details if he is? Failing that is there anyone else who does the same job?
I’m Hampshire based.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!