Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Oil Filter Housing, Pressure Relief Valve
-
- Newbie
- Posts: 4
- Joined: Tue Jul 13, 2021 2:28 pm
Oil Filter Housing, Pressure Relief Valve
I have a really bad chirping type of noise that is coming from my oil filter housing and have been reliably informed that it is the pressure relief valve. This part is an integral component of the oil filter housing and cannot be fitted separately. Could someone please confirm that this is the case and if so where is the best place to purchase a used oil filter housing. TIA Mark
- Rockhopper
- Senior Member
- Posts: 1116
- Joined: Fri Mar 06, 2020 7:05 pm
- Location: Mansfield
Oil Filter Housing, Pressure Relief Valve
Can't see any mention of one.
https://www.lllparts.co.uk/en/catalogs/ ... 11/11_2201
You don't say what car or engine you have though.
There is a pressure relief valve on the oil pump though.
https://www.lllparts.co.uk/en/catalogs/ ... 11/11_2201
You don't say what car or engine you have though.
There is a pressure relief valve on the oil pump though.
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
Most oil filter housings have an internal valve that prevents the oil to flow back in the sump.Rockhopper wrote: ↑Tue Jul 13, 2021 3:16 pm
There is a pressure relief valve on the oil pump though.
To keep oil pressue on the system for the next start.
A non return valve. I think he means that.
Last edited by GuidoK on Tue Jul 13, 2021 3:52 pm, edited 2 times in total.
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Oil Filter Housing, Pressure Relief Valve
Sounds like the usual hole in the elbow of your intake boot if M54 engine?
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
That would probably give an check engine light.
The TS says he's 'reliably informed', but without knowing how it was diagnosed the word reliably is of course not very reliable
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
-
- Newbie
- Posts: 4
- Joined: Tue Jul 13, 2021 2:28 pm
Oil Filter Housing, Pressure Relief Valve
Non return valve, sure that's what he said. Thanks. Its me getting confused and calling it a pressure relief valve.
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
So what engine?!!!!!
This is the most important piece of information.
For any technical question.
This is the most important piece of information.
For any technical question.
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
- Rockhopper
- Senior Member
- Posts: 1116
- Joined: Fri Mar 06, 2020 7:05 pm
- Location: Mansfield
Oil Filter Housing, Pressure Relief Valve
I'm not sure there is one on the M54 as the oil filer is not the canister type.
I also had the split intake pipe (the small pipe had gone totally and the corrugated on was split all round), it only very occasionally brought the light on, changing it improved the MPG by nearly 7 miles per gallon though!
I also had the split intake pipe (the small pipe had gone totally and the corrugated on was split all round), it only very occasionally brought the light on, changing it improved the MPG by nearly 7 miles per gallon though!
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
I am...Rockhopper wrote: ↑Tue Jul 13, 2021 4:03 pm I'm not sure there is one on the M54 as the oil filer is not the canister type.
For the m54 here is even an aftermarket repair solution (no experience with that one though)
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
- BumpyZ4
- Member
- Posts: 591
- Joined: Mon Feb 17, 2020 8:05 pm
- Location: New Orleans, LA USA
Oil Filter Housing, Pressure Relief Valve
Check the oil filter itself for pleats that have collapsed. If they collapse they make a high pitch squeal. There are videos of this on YouTube.
2003 E85 3.0i Sterling Gray
KLR 650
Diva Roadster (Kit Car)
KLR 650
Diva Roadster (Kit Car)
-
- Newbie
- Posts: 4
- Joined: Tue Jul 13, 2021 2:28 pm
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
I didn't place a link for the product.
I just mentioned it, that there is one for an m54 engine
But as you haven't specified your engine, I'm not going to place links to products that might not fit.
I'm sure you can google it for your specific engine, if there is one available, whatever your engine might be.
Take into account that there might be more than one valve in an oil filter housing. I'm sure that the guy who diagnosed your problem can tell you more about that as he diagnosed the problem. Not all of those valves might be replaceable.
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
-
- Newbie
- Posts: 4
- Joined: Tue Jul 13, 2021 2:28 pm
Oil Filter Housing, Pressure Relief Valve
Okay thanks. Its a 3.0i
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Filter Housing, Pressure Relief Valve
What year?
Or, better said: pre facelift or post facelift?
Last edited by GuidoK on Wed Jul 14, 2021 9:13 pm, edited 1 time in total.
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
- enuff_zed
- Lifer
- Posts: 14786
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Oil Filter Housing, Pressure Relief Valve
Or even simpler: do you have a dipstick?