Aircon- advice and INPA

bigwinn · Post by **bigwinn** » Sun Jun 13, 2021 10:59 am

enuff_zed wrote: ↑Sun Jun 13, 2021 10:40 am Hi bigwinn,
I know you're not exactly a novice, so feel free to disregard this but.........
Are you 100% sure the system is properly re-gassed? Not leaking straight back out again?

Deffo going to check that today

When it got regassed they recovered a good amount so I think there is pressure

All to check!

Thanks though- always good to ask right?

bigwinn · Post by **bigwinn** » Sun Jun 13, 2021 2:06 pm

So here is where I’m up to

Can find electrical power at the compressor, the dryer etc

Have lubricated the clutch

Checked fuses

The only thing I’m not getting a happy clean feeling with is the relay

I’m not getting a clear click from the relay area when switching on off

Could this be a relay issue on relay 5 under the fuses?

Thoughts?

SDJ · Post by **SDJ** » Sun Jun 13, 2021 10:51 pm

Hi, off topic, but which INPA menus are the screen shots from? Almost everything seems to be in German on mine for the E85.

bigwinn · Post by **bigwinn** » Mon Jun 14, 2021 7:54 am

SDJ wrote: ↑Sun Jun 13, 2021 10:51 pm Hi, off topic, but which INPA menus are the screen shots from? Almost everything seems to be in German on mine for the E85.

From inpa

I found the engine menu all to be untranslated but other modules to be English?

SDJ · Post by **SDJ** » Tue Jun 15, 2021 7:38 pm

bigwinn wrote: ↑Mon Jun 14, 2021 7:54 am I found the engine menu all to be untranslated

I certainly improved my German when looking at the DME! I didn't look at the other modules.

bigwinn · Post by **bigwinn** » Tue Jun 15, 2021 7:44 pm

SDJ wrote: ↑Tue Jun 15, 2021 7:38 pm
bigwinn wrote: ↑Mon Jun 14, 2021 7:54 am I found the engine menu all to be untranslated
I certainly improved my German when looking at the DME! I didn't look at the other modules.

Ja!

That’s my German done

Z4-forum.com

Z4-forum.com