Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Calling all INPA experts!
Calling all INPA experts!
My steering is off by 15 degrees but I can't send to did where in INPA I can reset it. All videos I watch for slightly different BMW models have different options I don't have in my UI.
Can anyone point me in the direction of where I can do that in INPA?
Thanks in advance!
Can anyone point me in the direction of where I can do that in INPA?
Thanks in advance!
Last edited by greg81 on Thu Apr 26, 2018 8:48 pm, edited 1 time in total.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
INPA reset steering angle sensor
You should be able to do it by going from lock to lock - I think.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
INPA reset steering angle sensor
Thanks, but that didn't work for me unfortunately.Scooba_Steve wrote: ↑Tue Apr 24, 2018 8:58 pm You should be able to do it by going from lock to lock - I think.
Having looked into this a little further I think I may have problems with my version/install of INPA. Every video I watch or tutorial I read they have options for resetting or for developers, but my options are always empty.
Could I potentially have a diagnostic only version of INPA? or can I install it with different settings to have compensations/dev mode enabled?
Thanks in advance
- ph001
- Lifer
- Posts: 3870
- Joined: Mon Oct 31, 2016 5:53 pm
- Location: N. Yorkshire.
INPA reset steering angle sensor
I'm fairly sure it will be down to a communication problem with some of the car's modules. INPA can usually always connect OK to the main ECU but struggles with some of the ancillary ECUs if the settings / lead aren't quite right.
I'm struggling with the same issue with INPA not talking to certain modules at the moment tbh so not sure what the solution is. If I suss it out I will be sure to let you know. I would possibly change the thread title to something like "Any INPA experts on here?" as I know there are a few members who have a lot of experience with INPA. Might draw them in.
I'm struggling with the same issue with INPA not talking to certain modules at the moment tbh so not sure what the solution is. If I suss it out I will be sure to let you know. I would possibly change the thread title to something like "Any INPA experts on here?" as I know there are a few members who have a lot of experience with INPA. Might draw them in.
INPA reset steering angle sensor
Cheers for that. It seems to read my DSC no problem at all, but just missing all the good options! I also get a version mismatch error which I'm sure isn't helping.
Thread title updated!
Thread title updated!
Calling all INPA experts!
I managed to resolve my issues with a different install of INPA, which had developer options. I recallibrated my steering angle sensor and all my problems have gone away
- ph001
- Lifer
- Posts: 3870
- Joined: Mon Oct 31, 2016 5:53 pm
- Location: N. Yorkshire.
Calling all INPA experts!
Thanks for updating
Calling all INPA experts!
For info the install I used was "mike's easy BMW tools"
The version that came with bcables was a complete pain in the ass. Mike's tools installed with one click.
The version that came with bcables was a complete pain in the ass. Mike's tools installed with one click.
Calling all INPA experts!
Also worth mentioning that it was a breeze on windows 10. The old windows 7 laptop I tried was a troublesome.
Who knows if it was the windows version or the install package but this combo worked a dream for me
Who knows if it was the windows version or the install package but this combo worked a dream for me