The top is out and on the ground and i purchased a new pump/motor from a gent on here. I installed it today and all lines are numbered and in the correct locations. The electrical lines are connected correctly. I hooked up some leads to a battery and nothing. I swapped them and still nothing. I've tried with the brass pin pushed and not pushed. The hinges aren't leaking either. The pump is working and so is the motor as I've had to refill the resivoir touch.
Kind of stumped. Is it self bleeding?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
New pump/motor, no leaks, top still doesn't work
-
- Newbie
- Posts: 5
- Joined: Sun Jun 06, 2010 6:59 pm
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
New pump/motor, no leaks, top still doesn't work
It is self bleeding, just top it up after its been run. So you have the hose connected in pairs, ie 11 & 13, 12&14?
Mike
Mike
-
- Newbie
- Posts: 5
- Joined: Sun Jun 06, 2010 6:59 pm
New pump/motor, no leaks, top still doesn't work
Yup. I also had the top upside down when trying to use it. I thought let me just flip it over. Sure enough l after I did she started to work. I feel like a dummy, I looked at the hinges and I was reversed in my head hahaha