Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Warning light help

Discuss problems you have had or are having with your Z4
Post Reply
alpharico
Newbie
Newbie
Posts: 2
Joined: Sun Feb 25, 2018 6:26 pm

Warning light help

Post by alpharico » Sun Feb 25, 2018 6:31 pm

:headbang:

Hi all

Had a look through and couldn’t find anything relating to the warning lights I’ve had come on my 2007 2.5si. (Pic attached)

The only other references online I’ve found suggest that these lights could be associated with a runflat pressure issue (which I’ve monitored and seem fine) or possibly ABS issues...anyone seen this combo of warning lights before??

Any help much appreciated
Attachments
EAB0D8A8-3BF2-4CFA-B738-5D0C3CD0DFAA.jpeg
EAB0D8A8-3BF2-4CFA-B738-5D0C3CD0DFAA.jpeg (211.86 KiB) Viewed 401 times

User avatar
ZedM
Member
Member
Posts: 158
Joined: Wed Sep 17, 2014 9:56 pm
Location: Derbyshire

Warning light help

Post by ZedM » Sun Feb 25, 2018 8:57 pm

Could be an ABS pump fault. I think I had these three on PLUS my speedo stopped working. A quick review of the forum told me that with these four symptoms it was likely to be the ABS sensor on the N/S/R hub. Took 20 mins and a £20 part to fix. I'm sure there are loads of reports of this type of problem within the forum. HTH
2003 Sterling Grey 2.5i SE, 17" Turbines and Falkens (no tramlining!), CDV Delete, Roof Motor Relocation by DLV.

alpharico
Newbie
Newbie
Posts: 2
Joined: Sun Feb 25, 2018 6:26 pm

Warning light help

Post by alpharico » Sun Feb 25, 2018 9:18 pm

Thanks for that - will look that up :thumbsup:

Aaron.litw
Newbie
Newbie
Posts: 23
Joined: Tue Mar 08, 2016 11:55 pm
Location: Wantage, Oxford

Warning light help

Post by Aaron.litw » Tue Feb 27, 2018 5:47 pm

I e had the same three lights on. I was hoping it was wheel speed sensor but just had fault codes read and its abs pump. :headbang:

mjennings23
Senior Member
Senior Member
Posts: 1178
Joined: Tue Mar 21, 2017 11:11 pm
Location: North West

Warning light help

Post by mjennings23 » Tue Feb 27, 2018 6:05 pm

As above, it could range from a simple sensor to a pump failure, so need to get codes read

Post Reply