Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Rattle/Vibration in engine (N52) when hot

Discuss problems you have had or are having with your Z4
User avatar
JonBooth
Member
Member
Posts: 102
Joined: Fri Aug 09, 2013 10:07 am

Rattle/Vibration in engine (N52) when hot

Post by JonBooth » Fri Feb 02, 2018 8:00 am

Hello,

Does your car have a manifold/cat heat shield in the engine bay? Have you checked it isn't loose? They are very easy to bend, maybe it's been lent on and is contacting something.

Cheers,

Jon.
Jon.
2007 BMW Z4 2.5i Sport

User avatar
enzed4
Lifer
Lifer
Posts: 3033
Joined: Fri May 16, 2014 9:23 am
Location: New Zealand

Rattle/Vibration in engine (N52) when hot

Post by enzed4 » Fri Feb 02, 2018 12:03 pm

I'd forgotten about this clip I uploaded to youtube - you can hear the noise at 54-56 sec. The engine had warmed up before revving so the noise was happening.
I'm leaning towards it being some heat shielding after listening to a few other clips online. I will have to get it up on the ramps and have a poke around.
Image
Gone: 2010 35i DCT
Gone: 2008 2.5Si Sport

Cooky3
Member
Member
Posts: 76
Joined: Sun Sep 03, 2017 8:51 pm
Location: Peterborough

Rattle/Vibration in engine (N52) when hot

Post by Cooky3 » Tue Feb 06, 2018 10:02 pm

Marlon wrote: Thu Feb 01, 2018 5:23 pm
ph001 wrote: Thu Feb 01, 2018 4:39 pmDare I ask if it sounds similar to this?..... https://www.youtube.com/watch?v=cgtHUhG ... e=youtu.be

Here are a full 9 pages to read on it! Still don't think the mystery has been solved as far as I know :(
https://z4-forum.com/forum/viewtopic.php?f=3&t=100400
I hope not for the OP's sake - absolute nightmare that thread :cry:
Indeed I hope not too. I am the unlucky git who has no hair left... But philosophical about it. I need to update my post. But in essence £1200 down ex labour in essence and no resolution. Engine idles fine and runs perfectly at the moment and if you were deaf you wouldn't know the difference. Heat shields all checked and obvious stuff too plus all timing chain, guides, tensioner, hubs replaced, oil filter housing checked, oil strainer.... Just living with it so if it doesn't effect your engines performance I'd recommend living with it unless you have deep pockets...

:wink:
I ain't fallin for no banana in my tail-pipe!
Jester's dead!

User avatar
enzed4
Lifer
Lifer
Posts: 3033
Joined: Fri May 16, 2014 9:23 am
Location: New Zealand

Rattle/Vibration in engine (N52) when hot

Post by enzed4 » Wed Feb 07, 2018 8:29 am

Cooky3 wrote: Tue Feb 06, 2018 10:02 pm
Marlon wrote: Thu Feb 01, 2018 5:23 pm
ph001 wrote: Thu Feb 01, 2018 4:39 pmDare I ask if it sounds similar to this?..... https://www.youtube.com/watch?v=cgtHUhG ... e=youtu.be

Here are a full 9 pages to read on it! Still don't think the mystery has been solved as far as I know :(
https://z4-forum.com/forum/viewtopic.php?f=3&t=100400
I hope not for the OP's sake - absolute nightmare that thread :cry:
Indeed I hope not too. I am the unlucky git who has no hair left... But philosophical about it. I need to update my post. But in essence £1200 down ex labour in essence and no resolution. Engine idles fine and runs perfectly at the moment and if you were deaf you wouldn't know the difference. Heat shields all checked and obvious stuff too plus all timing chain, guides, tensioner, hubs replaced, oil filter housing checked, oil strainer.... Just living with it so if it doesn't effect your engines performance I'd recommend living with it unless you have deep pockets...

:wink:
Sorry to hear about your probs with the engine - I'm hoping mine's nothing more than a heat shield rattle, but haven't had time to put it on ramps to check yet. I'll update the post when I can check.
Image
Gone: 2010 35i DCT
Gone: 2008 2.5Si Sport

Post Reply