Sat Nav Retrofit Fitting Details

Post Reply
cagatay87
Newbie
Newbie
Posts: 4
Joined: Tue Sep 20, 2016 9:00 pm

Sat Nav Retrofit Fitting Details

Post by cagatay87 » Fri Sep 08, 2017 3:25 pm

does anyone have pdf or diagram for how can i cut dash?
any measurement?
or any pdf for template?

User avatar
markplant
Lifer
Lifer
Posts: 3346
Joined: Mon Jul 21, 2014 8:16 pm
Location: Sheffield

Sat Nav Retrofit Fitting Details

Post by markplant » Fri Sep 08, 2017 5:33 pm

You might be better trying a breakers for a dash top from a nav car
3.0 Manual. Sterling Grey. Cream leather Electric an Heated. Professional Navigation/Sony tablet replacement. Storm Werks . an parts waiting to be fitted

User avatar
markplant
Lifer
Lifer
Posts: 3346
Joined: Mon Jul 21, 2014 8:16 pm
Location: Sheffield

Sat Nav Retrofit Fitting Details

Post by markplant » Fri Sep 08, 2017 5:34 pm

On eBay i think it's classiccarspares2016
3.0 Manual. Sterling Grey. Cream leather Electric an Heated. Professional Navigation/Sony tablet replacement. Storm Werks . an parts waiting to be fitted

cagatay87
Newbie
Newbie
Posts: 4
Joined: Tue Sep 20, 2016 9:00 pm

Sat Nav Retrofit Fitting Details

Post by cagatay87 » Sun Sep 10, 2017 10:01 pm

Nothing like that...

User avatar
srhutch
Moderator
Moderator
Posts: 26563
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Sat Nav Retrofit Fitting Details

Post by srhutch » Mon Sep 11, 2017 6:51 am

Just do as I did and make your own. Just remember you can make the hole bigger, but not smaller.
Image

User avatar
markplant
Lifer
Lifer
Posts: 3346
Joined: Mon Jul 21, 2014 8:16 pm
Location: Sheffield

Sat Nav Retrofit Fitting Details

Post by markplant » Mon Sep 11, 2017 7:45 am

eBay number 263152522471
3.0 Manual. Sterling Grey. Cream leather Electric an Heated. Professional Navigation/Sony tablet replacement. Storm Werks . an parts waiting to be fitted

cagatay87
Newbie
Newbie
Posts: 4
Joined: Tue Sep 20, 2016 9:00 pm

Sat Nav Retrofit Fitting Details

Post by cagatay87 » Mon Sep 11, 2017 8:01 am

I just need template with paper to cut , not compleatly dash bro

User avatar
pvr
Legend
Legend
Posts: 22804
Joined: Fri Jun 15, 2007 12:27 pm
Location: South East UK

Sat Nav Retrofit Fitting Details

Post by pvr » Mon Sep 11, 2017 8:13 am

I have fitted two of these, if you take a thin piece of cardboard it is easy to make the cutout and you can test it using the screen. Point to remember is that there is a small edge at the front that you don't remove and the legs of the screen have holes that need to lign up with the screws under the dash surface.
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Jeep
Z4M Silver Grey - non flimper spec (gone to Bing)

User avatar
srhutch
Moderator
Moderator
Posts: 26563
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Sat Nav Retrofit Fitting Details

Post by srhutch » Mon Sep 11, 2017 1:44 pm

That's not a bad price. THey were £200 when I did mine and was looking for a just in case solution :lol:
Image

User avatar
pvr
Legend
Legend
Posts: 22804
Joined: Fri Jun 15, 2007 12:27 pm
Location: South East UK

Sat Nav Retrofit Fitting Details

Post by pvr » Mon Sep 11, 2017 1:53 pm

ah yes, your rush job :lol:

I took 3 evenings if I remember well, to avoid the just in case ... measure, re-measure, cut, cut a bit more etc :D

You did take 3 years to finish it off though :poke:

Never again though.
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Jeep
Z4M Silver Grey - non flimper spec (gone to Bing)

User avatar
srhutch
Moderator
Moderator
Posts: 26563
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Sat Nav Retrofit Fitting Details

Post by srhutch » Mon Sep 11, 2017 1:57 pm

I did the measure twice cut once stuff, but the concern was the dremel slipping, although I did protect the dash the best I could.

3 years, you checky fecker :lol:

Where you been hiding anyway, not that we've missed you :P
Image

branebmw
Newbie
Newbie
Posts: 10
Joined: Sat Apr 07, 2018 6:26 am

Sat Nav Retrofit Fitting Details

Post by branebmw » Tue Oct 16, 2018 11:40 am

hello

I want to upgrade navi system to my bmw z4 2006 , i buy radio professional and monitor, what else do I need to do?
What is the catalog number of the cables?

Best regards

branebmw
Newbie
Newbie
Posts: 10
Joined: Sat Apr 07, 2018 6:26 am

Sat Nav Retrofit Fitting Details

Post by branebmw » Wed Oct 17, 2018 1:37 pm

i need wiring loom serial number 61120301701

User avatar
Alemito
Newbie
Newbie
Posts: 22
Joined: Mon Sep 02, 2019 12:10 pm
Location: Milano, Italy
Contact:

Sat Nav Retrofit Fitting Details

Post by Alemito » Sun Jan 10, 2021 6:40 pm

Where can i find a cutting template?

Post Reply