Page 1 of 1

Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Fri Jul 10, 2009 12:24 pm
by MarkC
This is for US Specs pre-face lift version (03'-05') with the rear round reverse lights. Face lift models may be similar.

Disclaimer:
Whatever you do to your own car is your own responsibility.

Rear Foglight:
One way would to add a fog light is by using a rear red lamp to the rear of the car, wired directly to the battery with a relay and an aftermarket illuminated switch attached to the dash. This is what most conversion shops use, but I didn't do it that way. For my conversion I used an LED bulb for the fog light.

Marker lights
UK regs require two front white lights, while in the US it is amber. I used LED lamps which satisfy UK regs and passes the MOT.
MarkC

Note: Edited to minimize information acquired by those who would use it to profit from.

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Sat Jul 11, 2009 1:39 am
by Aebous
Thanks a bunch!

I'm a bit unclear on the side markers. Your referring to the lights with the bmw roundels on them correct?

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Sat Jul 11, 2009 8:18 am
by MarkC
Aebous wrote:Thanks a bunch!

I'm a bit unclear on the side markers. Your referring to the lights with the bmw roundels on them correct?
Hi, thanks :)
I didn't use power from the side BMW roundel lights but I'm sure it could be used some how.

I'll update the 'how-to', I also have some pics but need to find a place to store them (don't know if I can upload them here?).

Thanks, MarkC
Note: Edited to minimize information acquired by those who would use it to profit from.

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Sat Jul 11, 2009 7:59 pm
by Aebous
Ohhh, ok. I'm bagging what your raking on the side lights now :D

Flikr works well with this forum.

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Tue Jul 14, 2009 3:55 am
by Aebous
Question, for the rear "foglight bulb" You mentioned you used a 1watt LED bulb.....are they that bright that it will pass inspection? Or is there a special type of automotive LED?

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Fri Jul 17, 2009 3:18 pm
by MarkC
Aebous wrote:Question, for the rear "foglight bulb" You mentioned you used a 1watt LED bulb.....are they that bright that it will pass inspection? Or is there a special type of automotive LED?
I used an automotive style LED bulb, it passed the MOT with out any issues.

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Sat Jul 25, 2009 12:28 am
by Aebous
Another question, now that I have looked at the bulb/housing in question, am I understanding correctly that you basically "deleted" one reverse light?
I.E. just put the bulb in the housing and left it in the trunk not visible outside the car?

Re: Addng Rear Fog light and Side Marker Lights to US Spec Zeds

Posted: Wed Jul 29, 2009 10:07 pm
by MarkC
Aebous wrote:Another question, now that I have looked at the bulb/housing in question, am I understanding correctly that you basically "deleted" one reverse light?
I.E. just put the bulb in the housing and left it in the trunk not visible outside the car?
Yes, you can use one reverse light as done in the UK and EU pre-facelift Z4s.