Page 1 of 1

Oil Catch Can on N20

Posted: Sat Apr 03, 2021 4:45 pm
by sumotan
Hi Guys,
Has anoyone installed the above ? Was think it might help minimize carbon build up in a log run.

Thanks

Oil Catch Can on N20

Posted: Sat Apr 03, 2021 6:30 pm
by Pbondar
The N20 had a much cleverer oil mist minimisation strategy then its predecessors and a better recovery system...I looked at in detail and even on opening up the intakes found at 50k miles little to note when compared to say the N54s..

Oil Catch Can on N20

Posted: Sun Apr 04, 2021 4:36 pm
by sumotan
Aaaaah as always many thanks Pete.

Oil Catch Can on N20

Posted: Tue Apr 06, 2021 5:31 pm
by mcbutler
Not required unless the engine is direct injection

Oil Catch Can on N20

Posted: Thu Apr 08, 2021 5:56 am
by sumotan
It is direct injection Mcbutler

Oil Catch Can on N20

Posted: Wed Aug 18, 2021 7:00 pm
by fader
Hello, I used the BMS Turbo dual baffle N20 oil tank to install, but the bms bracket is not suitable for e89 z4 and requires a DIY bracket. The following is my installation location and pictures I hope to help you.
WechatIMG658.jpeg
WechatIMG658.jpeg (136.64 KiB) Viewed 221 times

Oil Catch Can on N20

Posted: Wed Aug 18, 2021 7:35 pm
by GuidoK
I have a chinese clone of that BMS catch can in my car.
Costs about £20 on alie.
https://www.aliexpress.com/item/1005003117163545.html
But there are also other not so big ones for sale that are quite nice.

I don't think that there's a plug&play fit option for the e89, you have to make some sort of bracket.