Hi Guys,
Has anoyone installed the above ? Was think it might help minimize carbon build up in a log run.
Thanks
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Oil Catch Can on N20
Oil Catch Can on N20
The N20 had a much cleverer oil mist minimisation strategy then its predecessors and a better recovery system...I looked at in detail and even on opening up the intakes found at 50k miles little to note when compared to say the N54s..
-
- Member
- Posts: 241
- Joined: Fri Oct 30, 2020 3:31 pm
Oil Catch Can on N20
Aaaaah as always many thanks Pete.
-
- Senior Member
- Posts: 2552
- Joined: Fri May 26, 2017 3:40 pm
- Location: Plymouth
Oil Catch Can on N20
Not required unless the engine is direct injection
Mark
Plymouth
E89
35i
Carmine Red
Black leather
Plymouth
E89
35i
Carmine Red
Black leather
-
- Member
- Posts: 241
- Joined: Fri Oct 30, 2020 3:31 pm
Oil Catch Can on N20
It is direct injection Mcbutler
- fader
- Newbie
- Posts: 7
- Joined: Sat Aug 14, 2021 12:44 pm
- Location: shanghai
Oil Catch Can on N20
Hello, I used the BMS Turbo dual baffle N20 oil tank to install, but the bms bracket is not suitable for e89 z4 and requires a DIY bracket. The following is my installation location and pictures I hope to help you.
Z4 20i Msport | BMS JB4 Tuner | BMS Oil Catch | JB4 Universal Water Injection WMI Kit | Quaife ATB LSD | J-Fiber Dry Carbon Driveshaft | Michelin Pilot Sport 4 S |
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Oil Catch Can on N20
I have a chinese clone of that BMS catch can in my car.
Costs about £20 on alie.
https://www.aliexpress.com/item/1005003117163545.html
But there are also other not so big ones for sale that are quite nice.
I don't think that there's a plug&play fit option for the e89, you have to make some sort of bracket.
Costs about £20 on alie.
https://www.aliexpress.com/item/1005003117163545.html
But there are also other not so big ones for sale that are quite nice.
I don't think that there's a plug&play fit option for the e89, you have to make some sort of bracket.
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch