I’ve recently purchased the Carly dongle for iOS and run a diagnostic check. The first run produced about 20 faults which I cleared. I’ve now only one fault left which is:
Dynamische Stabilitaets Kontrolle / DSC
Fault Code: 006F72
Fault Explanation: :JBBF Embassy VEH MOD (0x315) does not
receive wrong or DLC message / EMF: Embassy VEH MOD (0x315)
does not receive wrong or DLC message
Should I be worried?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Carly
-
- Senior Member
- Posts: 2552
- Joined: Fri May 26, 2017 3:40 pm
- Location: Plymouth
Carly
Nope, its not on the fault code database so unlikely to be serious or relevant to operation/safety etc.
Modules give out codes for all sorts of things, you can gat a stability/ABS code if your wheel spins a tiny bit in the wet for example.
It even goes as far as reporting missed 'events' in the clock timing of the whole computer system which have no bearing on anything in reality.
So, if its not on the database I would clear it and see if it returns.
Modules give out codes for all sorts of things, you can gat a stability/ABS code if your wheel spins a tiny bit in the wet for example.
It even goes as far as reporting missed 'events' in the clock timing of the whole computer system which have no bearing on anything in reality.
So, if its not on the database I would clear it and see if it returns.
Mark
Plymouth
E89
35i
Carmine Red
Black leather
Plymouth
E89
35i
Carmine Red
Black leather
- Tinker15
- Member
- Posts: 690
- Joined: Thu Oct 11, 2018 8:42 pm
- Location: Holmfirth, West Yorkshire
Carly
Thank you for replying. I’ve cleared it once but it reappears when I do another scan. I’ll try again tomorrow to see if anything changes. If it is still there I will put it down as one of those things and ignore it!