Side Repeaters

Specific discussion about the E89 2009 Z4 (sDrive35is, sDrive35i, sDrive30i, sDrive23i)
Dellboy1948
Newbie
Newbie
Posts: 47
Joined: Sun Aug 12, 2018 11:28 pm
Location: Girvan Ayrshire

Side Repeaters

Post by Dellboy1948 » Mon Mar 25, 2019 9:14 pm

I changed mine, updates the car and smarter than the blobs, look inside wing when hood up and use long screwdriver to push fitting clip, on new ones gently bend back and forward small piece at end so that they fit perfect, plug and play. :driving:
2002 Dakar Yellow Z3, 2009-2018
3 litre S type 2006 Jaguar daily runner
2010 Z4 SDrive2.3i Havana brown :driving:

Frankie169
Member
Member
Posts: 204
Joined: Mon Aug 06, 2018 7:50 pm
Location: North Somerset

Side Repeaters

Post by Frankie169 » Wed Sep 18, 2019 9:43 am

I once saw a "how to fit video" for these on YouTube but spent the evening last night trying to find it again as ordered a part, has anyone got a link to the video as I couldn't find it
Toys: Z4 E89 35i in Blue / Ducati Multistrada 1260 DVT + love my watches

greg81
Senior Member
Senior Member
Posts: 1906
Joined: Thu Mar 02, 2017 6:33 pm

Side Repeaters

Post by greg81 » Wed Sep 18, 2019 10:31 am

It's literally just plug in and push into place. Nothing more complicated

Silverstar
Member
Member
Posts: 238
Joined: Fri Jun 21, 2019 10:06 am

Side Repeaters

Post by Silverstar » Wed Sep 18, 2019 10:38 am

Frankie169 wrote:
Wed Sep 18, 2019 9:43 am
I once saw a "how to fit video" for these on YouTube but spent the evening last night trying to find it again as ordered a part, has anyone got a link to the video as I couldn't find it
Here you go, not the best video but it gives you an idea:

https://www.youtube.com/watch?v=A_E8dod ... gs=pl%2Cwn
2009 sdrive30i auto Sapphire Black / Coral Red

Frankie169
Member
Member
Posts: 204
Joined: Mon Aug 06, 2018 7:50 pm
Location: North Somerset

Side Repeaters

Post by Frankie169 » Wed Sep 18, 2019 3:41 pm

Silverstar, your a gent. I did come across this one but theres another which shows it coming out then fitting the new ones as I gather you have to break off a pin or somethink
Toys: Z4 E89 35i in Blue / Ducati Multistrada 1260 DVT + love my watches

Silverstar
Member
Member
Posts: 238
Joined: Fri Jun 21, 2019 10:06 am

Side Repeaters

Post by Silverstar » Wed Sep 18, 2019 6:12 pm

From the various post and videos I have seen, I recall there is a tab at the end of the tail of the indicator that just snaps off with your hands. I'll be doing this soon too, just waiting to get them from the dealers and I am going to paint them to match my car before I install them. Not sure how to paint them though.
2009 sdrive30i auto Sapphire Black / Coral Red

Philly_Sweden
Member
Member
Posts: 483
Joined: Tue Dec 04, 2012 1:35 pm

Side Repeaters

Post by Philly_Sweden » Wed Sep 18, 2019 7:59 pm

You have to break the pin because the LCI cars have a hole in the fender for the pin to attach.

Break it, istall it and your Done. Just add some 3M :)

Post Reply