Who can code cruise control for Z4?

gnl · Post by **gnl** » Mon Oct 01, 2018 4:53 pm

My 2009 Z4 E89 didn't come with cruise control. Following a few forum posts from people doing similar I sourced and got a garage to fit the stalks which included cruise control. However, when they went to code them they couldn't as they said it wasn't appearing as an option in their software on the 'vehicle order' for my car. I don't know what software they were using to attempt this with.
Obviously this was an option on this model but not specified for mine. They said I could try to get BMW to change the vehicle order to get it listed for my car but they weren't that hopeful they would.
I'm sure there's a way around this as others seem to have achieved this. I do have a cable and software but am a little daunted about trying myself. So anyone know a garage or person int eh Newcastle on Tyne area or North East who has experience of this and can code it for me to get it working?

Thanks

Geoff

Nick9one1 · Post by **Nick9one1** » Mon Oct 01, 2018 6:47 pm

Where about's are you located?

gnl · Post by **gnl** » Mon Oct 01, 2018 7:13 pm

Newcastle on tyne.

Nick9one1 · Post by **Nick9one1** » Mon Oct 01, 2018 7:23 pm

That's probably a bit too far unfortunately!

gnl · Post by **gnl** » Mon Oct 01, 2018 7:24 pm

Ah shame. Where are you?

Nanu · Post by **Nanu** » Mon Oct 01, 2018 8:32 pm

Try giving Dean Winlow [email protected] a shout or visit his website. He has a garage in Ryton and re tunes and maps BM's so may be able to do what you want.
Tell him you were recommended by someone on the forum. I have just had mine serviced by him and he is as good as gold and very reasonable price wise

gnl · Post by **gnl** » Mon Oct 01, 2018 8:43 pm

Cheers. Will give it a try. Thanks

AnubisZed · Post by **AnubisZed** » Mon Oct 01, 2018 10:11 pm

It doesn't appear as an option, you add it to the VO, it won't already be there.

Have you checked out my "How-To"?..... Here >> viewtopic.php?f=46&t=107989

Coding is covered in Part 2, all you need to know, step by step instructions and a link to all the software you need (all perfectly legal as well, so nothing dodgy and from a virus/spamware free download site).
Alas I'm as far away from you as Nick9one1 is so can't really help directly.

gnl · Post by **gnl** » Mon Oct 01, 2018 11:28 pm

thanks for that. i did actually explore this option and was going to be brace and give it a go. however, i failed at the first hurdle as after loading INPA and selecting 'functional jobs' on the right hand box there was no 'ReadUIF' button on my software. I therefore couldn't get any further. If I've misread or need to do something to correct this I'd love to know. Thanks

AnubisZed · Post by **AnubisZed** » Tue Oct 02, 2018 1:12 pm

gnl wrote: ↑Mon Oct 01, 2018 11:28 pm thanks for that. i did actually explore this option and was going to be brace and give it a go. however, i failed at the first hurdle as after loading INPA and selecting 'functional jobs' on the right hand box there was no 'ReadUIF' button on my software. I therefore couldn't get any further. If I've misread or need to do something to correct this I'd love to know. Thanks

Did you download the software from the link I provided?

gnl · Post by **gnl** » Tue Oct 02, 2018 1:30 pm

Hi - thanks. I uninstalled what I had a reinstalled and got a bit further. However, I can't find E89 listed anywhere - not in the boxes along the bottom or in the screen list menu. Do I have to go in as another model?

AnubisZed · Post by **AnubisZed** » Tue Oct 02, 2018 2:32 pm

gnl wrote: ↑Tue Oct 02, 2018 1:30 pm Hi - thanks. I uninstalled what I had a reinstalled and got a bit further. However, I can't find E89 listed anywhere - not in the boxes along the bottom or in the screen list menu. Do I have to go in as another model?

When looking for E89, are you scrolling? It should scroll all the way down to R50 (Mini)

AnubisZed · Post by **AnubisZed** » Tue Oct 02, 2018 2:35 pm

Have a look at this video, shows you at 02:24 how to find e89...

https://www.youtube.com/watch?v=NFvwCurUpCE&t

Nanu · Post by **Nanu** » Tue Oct 02, 2018 7:43 pm

While we are on the subject of coding, can you use coding to allow the roof to retract with one press of the button instead of having to keep it pressed.

I know you can but an adapter of some sort but it''s expensive

Sorry for my ignorance but don't know anything about the subject

gnl · Post by **gnl** » Tue Oct 02, 2018 9:30 pm

Thanks for the tip. Actually the video is about expert I didn’t get that far, I was still inpa where I couldn’t find the e89.

Z4-forum.com

Z4-forum.com