Hey guys,
I have just had my mSport front bumper fitted to my car however they never told me that the oil cooler air duct wasn't correct so there is a stuff up that needs to be corrected so I have ordered the oil cooler air duct which is on back order from germany and will take a couple days to arrive.
My question to you guys is this:
Do I also need the item numbered 2 left and right for proper fitment of this bumper? to me those look like soft plastic air ducts that would or should cause no issues with fitment of the bumper. but if any of you guys have done this retrofit before and know any better please let me know in this thread ASAP, the bumper fitment wasn't perfect as the gap between the bonnet and the bumper was rather large and I don't know why. They are refitting it this week with the new oil cooler air duct and hopefully that was the problem.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
E89 z4 Msport bumper fitment question
-
- Member
- Posts: 102
- Joined: Fri Sep 08, 2017 9:04 am
E89 z4 Msport bumper fitment question
Well never mind guys. I ordered all the parts I need to get the job done properly. will post pics when I'm done.
-
- Lifer
- Posts: 8202
- Joined: Tue Oct 26, 2010 2:52 pm
E89 z4 Msport bumper fitment question
I’ll be interested in any details if you wouldn’t mind as you progress as I’ve bought the bumpers also ready for fitment in summer.
I’ve no idea where to start!
I’ve no idea where to start!
-
- Member
- Posts: 102
- Joined: Fri Sep 08, 2017 9:04 am
E89 z4 Msport bumper fitment question
Its a direct fitment however you do need to replace parts 2 left and right. As well 3 "oil cooler air duct" in the diagram. You can fit the bumper without replacing these parts however parts number 2 are longer than the msport versions and so it pushes the bumper forward from the inside causing an incorrect gap between the bonnet and the bumper.
Part number 1 I don't think is very important, that didn't cause any fitment issues but will revert back and let you know once I get all these parts and have the bumper refitted again.
Part number 1 I don't think is very important, that didn't cause any fitment issues but will revert back and let you know once I get all these parts and have the bumper refitted again.
-
- Lifer
- Posts: 8202
- Joined: Tue Oct 26, 2010 2:52 pm
E89 z4 Msport bumper fitment question
I read somewhere that the air intake initial ducting was different are those the parts you refer to above?
-
- Member
- Posts: 102
- Joined: Fri Sep 08, 2017 9:04 am
E89 z4 Msport bumper fitment question
Yup! Very expensive situation lol. BMW SA are insane with their pricing. But whatever the parts are ordered and its all going to be sorted correctly now and at least then its done properly. I don't want to hack and slash existing parts to "Make a plan"