Z4-forum.com

I want to put some gummi pflege on the roof seals etc on my new to me e89. Can I stop the roof opening procedure half way through so I can access the seals? Do I just take finger off button at a convenient point? Cheers

TO the last sentence. Yes. Super simple.

Yes if you let go of the button the roof should stop
That's how I did mine, I also used Gummi pledge and sprayed white grease on the pivots

Deddi wrote: ↑Tue Feb 13, 2018 9:40 pmI want to put some gummi pflege on the roof seals etc on my new to me e89. Can I stop the roof opening procedure half way through so I can access the seals? Do I just take finger off button at a convenient point? Cheers

Unless you have a smartop fitted, in which case it will carry on, be careful!
Rob

Rob what's the difference between smart top and comfort acces ?
I can lower and raise mine using the fob but it stops if I let go of the button same with the buttons on the console

Thanks for replies

Gaffa22 wrote: ↑Tue Feb 13, 2018 9:48 pmRob what's the difference between smart top and comfort acces ?
I can lower and raise mine using the fob but it stops if I let go of the button same with the buttons on the console

With the smartop fitted the dash buttons become one touch operation & the remote works the roof with a 3 second press.
Also let’s you raise & lower roof on the wing, Windows can be lowered with the remote as well
https://youtu.be/9YALWutM-Cc
Rob

You can configure smart top to work as one touch or factory operation. It has several features.

Best solution for rubber seal noise was glass paper and not gummi which washes away after a short while. Taking the shine off the rubber solved all my noise.