Page 2 of 2
Buying replacement - after market wheels
Posted: Wed Dec 06, 2017 10:55 pm
by mr wilks
Smartbear wrote: ↑Wed Dec 06, 2017 10:51 pm
SteveSmith wrote: ↑Wed Dec 06, 2017 9:37 pm
Smartbear wrote: ↑Wed Dec 06, 2017 4:36 pm
It’s not the centre cap hole, it’s the hole that fits over the hub
Rob
It’s the diameter of the bolt holes
It can’t be that, 120mm? The bolt holes are much smaller than that measurement
Rob
5 x 120 means 5 bolt holes measuring 120mm hole to hole / probably better explained here
https://www.linkedin.com/pulse/how-meas ... arrol-yang
Buying replacement - after market wheels
Posted: Wed Dec 06, 2017 11:24 pm
by SteveSmith
Smartbear wrote: ↑Wed Dec 06, 2017 10:51 pm
SteveSmith wrote: ↑Wed Dec 06, 2017 9:37 pm
Smartbear wrote: ↑Wed Dec 06, 2017 4:36 pm
It’s not the centre cap hole, it’s the hole that fits over the hub
Rob
It’s the diameter of the bolt holes
It can’t be that, 120mm? The bolt holes are much smaller than that measurement
Rob
It’s amazing how something written can be read completely differently to the way it was intended!
If you were to draw a circle connecting the bolt holes up the diameter of that circle would be 120mm!
Hope that makes sense!
Buying replacement - after market wheels
Posted: Wed Dec 06, 2017 11:26 pm
by Smartbear
I’ve seen the light
Rob
Buying replacement - after market wheels
Posted: Thu Dec 07, 2017 9:40 am
by bob4333
And another vote for rimstyle. Great service.
Buying replacement - after market wheels
Posted: Thu Dec 07, 2017 12:31 pm
by Driver55
As SteveSmith said....
The Pitch Circle Diameter (PCD) is the diameter of the imaginary circular line which passes through the centre of all the studs, wheel bolts or wheel fixing holes.
Personally, I would give a vote for the BBS CH-R wheels....love the look of them on stuartinzg's car..
Mike.
Buying replacement - after market wheels
Posted: Fri Dec 08, 2017 9:04 pm
by Gaffa22
The diameter across the centre of the bolt holes
So make a circle that dissects the bolt hole centres and it will be 120mm